Tools and Equipment - Norco

Categories

or browse the results below.

Page 5 of 6 (Showing results 201 - 250 of 281)
201.) 910135 - Item No.
Air Operated Hydraulic Pump


Product image of 910135 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
202.) 915006 - Item No.
15 Ton Capacity Cylinder 6" Stroke


INTENDED USE:

For many applications including shop, agricultural, automotive / truck service needs and construction maintenance applications where lifting, pushing, pulling, bending or holding may be required.

FEATURES:
  • High flow quick connecting coupler and dust cap included on all models.
  • Unique piston and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extending and jamming.
  • Nickel plating on most cylinder pistons inhibits rusting.
  • Baked enamel exterior finish for increased corrosion resistance.
  • Polyurethane seals and wipers provide high cycle life.
  • Heavy duty return springs provide consistent performance.
  • Cylinders comply with ANSI B 30.1.
DIMENSIONS:
Stroke 6"
Minimum Height 10.69"
Maximum Height 16.69"
Oil Capacity (Cu. In.) 18.84
Shipping Weight 15 lbs.
   



Product image of 915006 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $484.71
203.) 920020 - Item No.
Collision Repair Kit 20 Ton


Product image of 920020 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
204.) 925009 - Item No.
Steel Hand Pump 2,850 P.S.I.


Product image of 925009 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
205.) 925011 - Item No.
200 / 10,000 P.S.I. Two-Speed Lightweight Hand Pump


INTENDED USE:

For many applications including shop, agricultural, automotive/truck service needs and construction maintenance applications where high pressure pumps are required to activate cylinders rated as high as 55 ton capacity.

FEATURES:
  • 3/8 NPT hose connection on all pumps.
  • Internal pressure relief valves for overload protection.
  • External load release valve for single-acting cylinder operation.
  • Two-speed pump operation reduces handle strokes by as much as 78% over single speed pumps.
  • Durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base for maximum corrosion resistance and lightweight handling.
  • Handle lock for easy carrying.
  • Non-conductive fiberglass handle for operator safety.



Product image of 925011 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $403.29
206.) 925014 - Item No.
Norco 925014 Two-Speed Lightweight Hydraulic Hand Pump, 10,000 PSI


  • Applications: Two-speed lightweight hydraulic hand pump for shop, agricultural, automotive, truck-service, industrial, and construction applications.
  • Capacity: Operates high-pressure hydraulic cylinders rated up to 55 tons.
  • Pressure rating: 400 PSI first stage; 10,000 PSI second stage.
  • Two-speed operation: Reduces handle strokes by as much as 78% compared with a single-speed pump.
  • Usable oil capacity: 155 cu. in.
  • Oil displacement per stroke: 2.40 cu. in. first stage; 0.151 cu. in. second stage.
  • Maximum piston effort: 95 lb.
  • Valve configuration: Integral four-way valve for double-acting cylinders and external load-release valve for single-acting cylinders.
  • Overload protection: Internal pressure-relief valves.
  • Connection: 3/8 in. NPT hydraulic hose connection.
  • Construction: Glass-filled nylon reservoir and nylon-encapsulated aluminum pump base for corrosion resistance and lighter handling.
  • Handle: Non-conductive fiberglass handle with carrying and storage lock.
  • Dimensions: 21.75 in. L x 4.75 in. W x 9 in. H.
  • Handle arc: 50 degrees.
  • Pump weight: 22 lb.



Product image of 925014 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,304.71
207.) 925023 - Item No.
Norco 925023 25-Ton Single-Acting Hydraulic Cylinder, 4-Inch Stroke


  • Capacity: 25 tons.
  • Applications: Designed for lifting, pushing, pulling, bending, and holding in shop, agricultural, automotive, truck-service, construction, and maintenance environments.
  • Operation: Single-acting cylinder with heavy-duty spring return.
  • Stroke: 4 in.
  • Minimum collapsed height: 8.5 in.
  • Maximum extended height: 12.5 in.
  • Oil capacity: 20.60 cu. in.
  • Connections: High-flow quick-connect coupler and protective dust cap included.
  • Load protection: Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Corrosion resistance: Nickel-plated piston and baked-enamel exterior finish.
  • Sealing system: Polyurethane seals and wipers designed for high-cycle service.
  • Compliance: ANSI B30.1.
  • Shipping weight: 18 lb.



Product image of 925023 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $780.00
208.) 925024 - Item No.
NORCO 925024 25-TON HYDRAULIC CYLINDER WITH 10-1/4-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity25 tons
ActionSingle-acting
Stroke10.25 in.
Oil capacity52.79 cu. in.
Shipping weight31 lb

PRODUCT DIMENSIONS

Minimum height14.75 in.
Maximum height25 in.



Product image of 925024 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,055.82
209.) 930003 - Item No.
NORCO 930003 30-TON HYDRAULIC CYLINDER WITH 2-7/16-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity30 tons
ActionSingle-acting
Stroke2.44 in.
Oil capacity15.85 cu. in.
Shipping weight15 lb

PRODUCT DIMENSIONS

Minimum height4.63 in.
Maximum height7.06 in.



Product image of 930003 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $681.86
210.) 930008 - Item No.
NORCO 930008 30-TON DOUBLE-ACTING HYDRAULIC CYLINDER WITH 8-1/4-INCH STROKE


PRODUCT DETAILS

Double-acting hydraulic cylinder for applications requiring controlled pushing and pulling force.

SPECS

Push capacity30 tons
Pull capacity5 tons
ActionDouble-acting
Stroke8.25 in.
Push oil capacity53.67 cu. in.
Pull oil capacity25 cu. in.
Cylinder bore diameter2.88 in.
Effective area, push6.51 sq. in.
Effective area, pull3 sq. in.
Shipping weight40 lb

PRODUCT DIMENSIONS

Minimum height15.25 in.
Maximum height23.5 in.
Piston outside diameter2.13 in.
Cylinder outside diameter4 in.
Saddle diameter2 in.
Collar thread size3.31 x 12



Product image of 930008 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,247.86
211.) 950005 - Item No.
NORCO 950005 50-TON HYDRAULIC CYLINDER WITH 2-3/8-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity50 tons
ActionSingle-acting
Stroke2.38 in.
Oil capacity22.91 cu. in.
Shipping weight24 lb

PRODUCT DIMENSIONS

Minimum height4.81 in.
Maximum height7.19 in.



Product image of 950005 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $914.71
212.) 950006 - Item No.
Aluminum Cylinder 50 Ton


Product image of 950006 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
213.) 955055 - Item No.
Aluminum Cylinder 55 Ton


Product image of 955055 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
214.) YM-500 - Item No.
Floor Jack 5 Ton, Made in Japan


Product image of YM-500 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
215.) YM1500 - Item No.
Floor Jack 15 Ton


Product image of YM1500 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
216.) YM150M - Item No.
Floor Jack 1-1/2 Ton


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
217.) YM300M - Item No.
Floor Jack 3 Ton (Made in Japan)


NSN TEST




Product image of YM300M on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
218.) 72000Ei - Item No.
NORCO 72000EI 1-1/2-TON OPEN-FRONT TRANSMISSION JACK


PRODUCT DETAILS

Imported 1-1/2-ton transmission jack for heavy-truck transmissions in dealerships, maintenance facilities, and heavy-duty transmission repair centers.

FEATURES

  • Wide open-front chassis supports low removal and stable load distribution.
  • Fully adjustable universal saddle includes adjustable positioning arms.
  • Heavy-duty chain and tensioner secure the load.
  • Safety overload system protects against operation beyond the ASME/PASE load-limiting standard.
  • Full 360-degree rotating handle operates in any position.
  • Four full-swivel ball-bearing casters support positioning.

SPECS

Capacity1-1/2 tons
Low lift height7.75 in.
High lift height36.5 in.
Saddle size10.25 x 15.25 in.
Shipping weight310 lb

PRODUCT DIMENSIONS

Length45 in.
Width28 in.



Product image of 72000Ei on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,856.99
219.) 76412BG - Item No.
Bottle Jack with Gauge Hole 12-1/2 Ton


INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:
  • Two piece zinc plated handle.
  • Prevent rust with “Parkerized” pump piston, ram and extension screw.
  • No leak “Uniweld” construction.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard
  • Designed with a removable plug so a gauge can be adapted to the jack.
  • "G" models are designed with a removable plug so a gauge can be adapted to the jack.



Product image of 76412BG on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $162.64
220.) 76520BG - Item No.
Bottle Jack with Gauge Hole 22 Ton


INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:
  • Two piece zinc plated handle.
  • Prevent rust with “Parkerized” pump piston, ram and extension screw.
  • No leak “Uniweld” construction.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard
  • Designed with a removable plug so a gauge can be adapted to the jack.
  • "G" models are designed with a removable plug so a gauge can be adapted to the jack.



Product image of 76520BG on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $239.00
221.) 81022Bi - Item No.
Trailer Stabilizer Stand Imported 20 Ton


Product image of 81022Bi on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $442.80
222.) 82999Ai - Item No.
NORCO 82999AI 10 TON IMPORTED AIR LIFT JACK


PRODUCT DETAILS

Imported 10-ton air lift jack designed to lift the entire front or rear of trucks, buses, and farm equipment in dealer garages, construction repair shops, and bus company garages.

FEATURES

  • Three-way heavy-duty air valve provides fine control when lifting or lowering.
  • Automatic safety lock engages at six height positions independent of air pressure.
  • Designed to lift the entire front or rear of a vehicle.
  • Front swivel caster and two 12-1/4-inch pneumatic rear tires support maneuverability.
  • Adjustable lifting saddles can be raised and extended to the desired position.

SPECS

Capacity10 tons
Low lift height12.25 in.
High lift height49.5 in.
Saddle reach13.5 in.
Shipping weight817 lb

PRODUCT DIMENSIONS

Length39.75 in.
Width34 in.
Height66.25 in.



Product image of 82999Ai on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $5,285.99
223.) 904004C - Item No.
NORCO 904004C 4 TON CAPACITY COLLISION / MAINTENANCE REPAIR KIT, FORGED ADAPTERS


PRODUCT DETAILS

Four-ton repair kit with forged steel adapters, for collision repair, industrial, and construction work such as spreading, clamping, pushing, and lifting.

FEATURES

  • Pump gauge shows the tonnage being applied.
  • Quick-Lock design allows fast assembly and disassembly.
  • Thick-walled extension tubes add strength and wear life.
  • Flexible hydraulic hose has spring guards at both ends.
  • Forged steel adapters add strength and durability.
  • Roto-molded plastic case keeps components organized for storage and carrying.
  • Kit includes a pump, hose, ram, wedge ram, extension tubes, saddle, heads, bases, and toes.

SPECS

Capacity4 tons
Pump pressure10,000 psi
Ram stroke4 in.
Wedge ram capacity1/2 ton
Extension tube lengths4 in., 8 in., 12 in., 16 in.
Hose length6 ft
Kit weight41 lb



Product image of 904004C on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $704.50
224.) 910005B - Item No.
10 Ton Collision Kit


Product image of 910005B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
225.) 910005C - Item No.
NORCO 910005C 10 TON CAPACITY COLLISION / MAINTENANCE REPAIR KIT, FORGED ADAPTERS


PRODUCT DETAILS

Ten-ton repair kit with forged steel adapters, for collision repair, industrial, and construction work such as spreading, clamping, pushing, lifting, and automotive frame straightening.

FEATURES

  • Pump gauge shows the tonnage being applied.
  • Quick-Lock design allows fast assembly and disassembly.
  • Long handle makes pumping easier.
  • Thick-walled extension tubes add strength and wear life.
  • Forged steel adapters add strength and durability.
  • Roto-molded plastic case keeps components organized for storage and carrying.
  • Kit includes a pump with gauge, hose, ram, wedge ram, extension tubes, saddle, heads, bases, and toes.

SPECS

Capacity10 tons
Pump pressure10,000 psi
Ram stroke6 in.
Wedge ram capacity1/2 ton
Extension tube lengths5 in., 10 in., 14 in., 19 in.
Hose length6 ft
Kit weight83 lb



Product image of 910005C on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $788.54
226.) 910017B - Item No.
Norco 910017B 10,000 PSI Air/Hydraulic Foot Pump with Gauge


10,000 PSI maximum hydraulic pressure; Designed for use with single-acting hydraulic cylinders; Air motor requires only 80 PSI shop air to generate 10,000 PSI hydraulic pressure; Foot-operated treadle provides advance, hold, and retract functions; Built-in pressure gauge; 127 cu. in. oil capacity; Internal pressure relief valve helps prevent overload conditions; Air exhaust muffler reduces operating noise; Air and oil inlet filters help reduce contamination; Lightweight corrosion-resistant reservoir construction.


Product image of 910017B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $909.00
227.) 910018B - Item No.
NORCO 910018B 10,000-PSI 2-GALLON AIR/HYDRAULIC FOOT PUMP


PRODUCT DETAILS

Two-gallon air/hydraulic foot pump with steel reservoir for automotive, truck, industrial, and construction applications using single-acting cylinders.

FEATURES

  • Uses exhaust air to assist pump operation.
  • Air exhaust muffler supports quieter operation.
  • Air and oil inlet filters reduce contamination risk.
  • Foot pedal provides hands-free pumping and load release.
  • Internal pressure-relief valve supports overload protection.
  • Two-gallon steel reservoir.

SPECS

Hydraulic pressure10,000 psi
Required air pressure80 psi
Reservoir capacity2 gal.
Cylinder compatibilitySingle-acting
Reservoir materialSteel



Product image of 910018B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,245.99
228.) 910019B - Item No.
Electro/Hydraulic Pump 10,000 PSI


"Z" Series

NOTE: All electrical motors are warranted against defects in material and workmanship for one year from the date of end user’s purchase.

INTENDED USE:

For automotive / truck, industrial & construction jobs. Will handle single-acting cylinders up to 100 ton. The added convenience of an electro-hydraulic pump reduces pumping time and effort.

FEATURES:
  • Two-speed design reduces cycle times for improved productivity.
  • Single-phase 115 VAC, 1 hp induction motor will start at full load and stand up to continuous duty applications. Requires a steady power supply.
  • 10 foot pendant controls the motor operation.
  • Manual advance/retract valve control for single-acting cylinders.
  • LCD display provides a number of diagnostic and readout capabilities.



Product image of 910019B on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $4,417.00
229.) 910026A - Item No.
Norco 910026A 10-Ton Single-Acting Hydraulic Cylinder, 6.13-Inch Stroke


  • Capacity: 10 tons.
  • Applications: Designed for lifting, pushing, pulling, bending, and holding in shop, agricultural, automotive, truck-service, construction, and maintenance environments.
  • Operation: Single-acting hydraulic cylinder with heavy-duty spring return.
  • Stroke: 6.13 in. (nominal 6-1/8 in.).
  • Minimum collapsed height: 12.5 in.
  • Maximum extended height: 18.63 in.
  • Oil capacity: 13.67 cu. in.
  • Connections: High-flow quick-connect coupler and dust cap included.
  • Load protection: Piston and cylinder bearings absorb eccentric-load stresses and help protect against abrasion, overextension, and jamming.
  • Corrosion resistance: Nickel-plated piston and baked-enamel exterior finish.
  • Sealing system: Polyurethane seals and wipers support high-cycle service.
  • Compliance: ANSI B30.1.
  • Shipping weight: 10 lb.



Product image of 910026A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $415.00
230.) 910027A - Item No.
Norco 910027A 10-Ton Short Hydraulic Cylinder with Adapter, 2.13-Inch Stroke


  • Capacity: 10 tons.
  • Applications: Compact cylinder for lifting, pushing, pulling, bending, and holding in shop, agricultural, automotive, truck-service, construction, and maintenance environments.
  • Configuration: Short single-acting hydraulic cylinder with adapter and heavy-duty spring return.
  • Stroke: 2.13 in. (nominal 2-1/8 in.).
  • Minimum collapsed height: 4.5 in.
  • Maximum extended height: 6.63 in.
  • Oil capacity: 4.75 cu. in.
  • Connections: High-flow quick-connect coupler and dust cap included.
  • Load protection: Piston and cylinder bearings absorb eccentric-load stresses and help protect against abrasion, overextension, and jamming.
  • Corrosion resistance: Nickel-plated piston and baked-enamel exterior finish.
  • Sealing system: Polyurethane seals and wipers support high-cycle service.
  • Compliance: ANSI B30.1.
  • Shipping weight: 6 lb.



Product image of 910027A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $321.86
231.) 910028A - Item No.
Norco 910028A 1-Ton Hydraulic Wedge Ram


  • Capacity: 1 ton.
  • Applications: Designed for lifting, pushing, pulling, bending, holding, and spreading in confined work areas.
  • Jaw range: Opens from 3/8 in. to 3-11/16 in.
  • Retraction: Spring-retractable jaws.
  • Closed arm height: 0.375 in.
  • Open arm height: 3.6875 in.
  • Overall dimensions: 2.01 in. L x 2.01 in. W x 8.78 in. H.
  • Cylinder area: 1.00 sq. in.
  • Oil capacity: 0.61 cu. in.
  • Shipping weight: 5 lb.



Product image of 910028A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $280.43
232.) 910029A - Item No.
NORCO 910029A 10 TON CAPACITY CYLINDER, 10-1/8 INCH STROKE


PRODUCT DETAILS

Ten-ton single-acting cylinder with a 10-1/8 inch stroke, for shop, agricultural, automotive and truck service, and construction maintenance applications where lifting, pushing, pulling, bending, or holding is required.

FEATURES

  • High-flow quick-connect coupler and dust cap are included.
  • Piston and cylinder bearings absorb eccentric loads to protect against abrasion, overextending, and jamming.
  • Baked enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers provide high cycle life.
  • Heavy-duty return springs provide consistent performance.
  • Complies with ANSI B30.1.

SPECS

Capacity10 tons
Stroke10.13 in.
Oil capacity22.59 cu. in.
Shipping weight14 lb

PRODUCT DIMENSIONS

Minimum height16.5 in.
Maximum height26.63 in.



Product image of 910029A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $526.00
233.) 910052A - Item No.
Norco 910052A 10,000 PSI Electro-Hydraulic Pump for Single-Acting Cylinders


  • Applications: Electro-hydraulic pump for automotive, truck, industrial, and construction jobs.
  • Compatibility: Operates single-acting cylinders rated up to 100 tons.
  • Hydraulic pressure: 200 PSI first stage; 10,000 PSI second stage.
  • Usable oil capacity: 238 cu. in.
  • Output flow: 200 cu. in. per minute first stage; 20 cu. in. per minute second stage.
  • Motor: 115 VAC, 1/2 hp motor capable of operation at voltages as low as 60 volts.
  • Current draw: 9.5 amps.
  • Operation: Two-speed motor design with three-way, two-position valve.
  • Valve function: Advance, hold, and retract.
  • Control: 10 ft. pendant supports operation away from the load.
  • Connection: 3/8-18 NPT hydraulic connection.
  • Sound level: 85 dBA.
  • Construction: Lightweight, compact design with high-strength molded shroud and integral carrying handle.
  • Motor protection: Shroud helps protect the motor from contamination.



Product image of 910052A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $3,349.45
234.) 910210B - Item No.
PUMP FOR 910005B


Product image of 910210B on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $280.64
235.) 910220A - Item No.
RAM FOR 910005A-OBSOLETE

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
236.) 910220B - Item No.
RAM FOR 910005B


Product image of 910220B on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $291.99
237.) 910223A - Item No.
WEDGE RAM FOR 904004A910005A

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $35.20
238.) 910227A - Item No.
RAM TOE FOR 910005A

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $10.09
239.) 910227B - Item No.
RAM TOE FOR 910005B

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $34.66
240.) 920020A - Item No.
NORCO 920020A 20 TON CAPACITY COLLISION / MAINTENANCE REPAIR KIT, FORGED ADAPTERS


PRODUCT DETAILS

Deluxe twenty-ton repair kit with forged adapters, for repairing heavy road machinery, trucks, and farm equipment, and for some heavy construction applications.

FEATURES

  • Two steel cases with carrying handles share the weight for easier handling.
  • Two-speed pump quickly raises the ram to the load, and a secondary pump provides the power stroke.
  • Pump gauge shows the tonnage being applied.
  • Kit includes a 20-ton ram, toe lift, wedge head, vee head, saddle, bases, and extension tubes.

SPECS

Capacity20 tons
Ram stroke5 in.
Extension tube lengths5 in., 10 in., 20 in., 27.5 in.
Kit weight153 lb



Product image of 920020A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,819.00
241.) 925009A - Item No.
Norco 925009A 2,850 PSI Single-Speed Steel Hydraulic Hand Pump


  • Applications: Hydraulic hand pump for shop, agricultural, automotive, truck-service, and construction-maintenance applications.
  • Pump type: Single-speed steel hand pump.
  • Pressure rating: 2,850 PSI.
  • Usable oil capacity: 18 cu. in.
  • Oil displacement per stroke: 0.16 cu. in.
  • Maximum handle effort: 57 lb.
  • Piston stroke: 0.81 in.
  • Connection: 3/8 in. NPT.
  • Valving: External load-release valve for single-acting cylinder operation.
  • Protection: Internal pressure-relief valve protects against overload.
  • Dimensions: 13.38 in. L x 5.25 in. W x 5.25 in. H.
  • Handle arc: 40 degrees.
  • Pump weight: 11 lb.



Product image of 925009A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $524.00
242.) 925010A - Item No.
NORCO 925010A 10,000 PSI SINGLE-SPEED STEEL HAND PUMP


PRODUCT DETAILS

Single-speed steel hand pump rated at 10,000 psi, for shop, agricultural, automotive and truck service, and construction maintenance applications that need high pressure to activate cylinders rated up to 55 tons.

FEATURES

  • Steel construction.
  • 3/8 NPT hose connection.
  • Internal pressure relief valves provide overload protection.
  • External load release valve supports single-acting cylinder operation.

SPECS

Pressure rating10,000 psi
Usable oil capacity40 cu. in.
Oil displacement per stroke0.16 cu. in.
Maximum handle effort111 lb
Weight13 lb

PRODUCT DIMENSIONS

Length23 in.
Width5.25 in.
Height5.25 in.



Product image of 925010A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $325.00
243.) 925012A - Item No.
Norco 925012A 10,000 PSI Single-Speed Lightweight Hydraulic Hand Pump


  • Applications: High-pressure hand pump for shop, agricultural, automotive, truck-service, and construction-maintenance applications.
  • Compatibility: Activates hydraulic cylinders rated up to 55 tons.
  • Pump type: Single-speed, lightweight hand pump.
  • Pressure rating: 10,000 PSI.
  • Usable oil capacity: 55 cu. in.
  • Oil displacement per stroke: 0.151 cu. in.
  • Maximum handle effort: 85 lb.
  • Piston stroke: 1.00 in.
  • Connection: 3/8 in. NPT.
  • Valving: External load-release valve for single-acting cylinder operation.
  • Protection: Internal pressure-relief valve protects against overload.
  • Construction: Glass-filled nylon reservoir and nylon-encapsulated aluminum pump base provide corrosion resistance and lightweight handling.
  • Handle: Non-conductive fiberglass handle with carrying and storage lock.
  • Dimensions: 21.63 in. L x 4.75 in. W x 7 in. H.
  • Handle arc: 50 degrees.
  • Pump weight: 9 lb.



Product image of 925012A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $400.43
244.) 925026B - Item No.
NORCO 925026B 20-TON HYDRAULIC CYLINDER WITH 1.75-INCH STROKE


PRODUCT DETAILS

Single-acting hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Heavy-duty return spring provides consistent performance.
  • Complies with ANSI B30.1.

SPECS

Capacity20 tons
ActionSingle-acting
Stroke1.75 in.
Oil capacity7.77 cu. in.
Shipping weight11 lb

PRODUCT DIMENSIONS

Minimum height3.88 in.
Maximum height5.63 in.



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $530.99
245.) 925027A - Item No.
NORCO 925027A 25-TON HYDRAULIC CYLINDER WITH 14.25-INCH STROKE


PRODUCT DETAILS

Single-acting hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Heavy-duty return spring provides consistent performance.
  • Complies with ANSI B30.1.

SPECS

Capacity25 tons
ActionSingle-acting
Stroke14.25 in.
Oil capacity73.39 cu. in.
Shipping weight39 lb

PRODUCT DIMENSIONS

Minimum height22.88 in.
Maximum height37.13 in.



Product image of 925027A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,176.99
246.) 955019A - Item No.
NORCO 955019A 50-TON HYDRAULIC CYLINDER WITH 6.25-INCH STROKE


PRODUCT DETAILS

Single-acting hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Heavy-duty return spring provides consistent performance.
  • Complies with ANSI B30.1.

SPECS

Capacity50 tons
ActionSingle-acting
Stroke6.25 in.
Oil capacity69.06 cu. in.
Shipping weight51 lb

PRODUCT DIMENSIONS

Minimum height11.13 in.
Maximum height17.38 in.



Product image of 955019A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,004.99
247.) SG-8888 - Item No.
Floor Jack 1-1/4 Ton


Product image of SG-8888 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
248.) WFN-150 - Item No.
Floor Jack 1-1/2 Ton (Made in Taiwan)


Product image of WFN-150 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
249.) YM-1000 - Item No.
Floor Jack 10 Ton (Made in Japan)


Product image of YM-1000 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
250.) YM-125M - Item No.
Floor Jack 1-1/4 Ton


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
Page 5 of 6 (Showing results 201 - 250 of 281)

« Back to Tools and Equipment Manufacturers