Tools and Equipment - Engine Hoist / Shop Crane

or browse the results below.

Page 1 of 1 (Showing results 1 - 8 of 8)

1.) 78002 - Item No.
Foldable Engine Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

2.) 78102 - Item No.
Shop Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

3.) 78106 - Item No.
Foldable Shop Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

4.) 78600 - Item No.
Shop Hoist 3 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

5.) 78204A - Item No.
1000 Lb Truck Mounted Crane w/ Winch

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

6.) 78605A - Item No.
NORCO 78605A 3 TON CAPACITY ELECTRO/HYDRAULIC FLOOR CRANE

PRODUCT DETAILS

Three-ton electro/hydraulic floor crane for lifting heavy items, including the removal and installation of diesel engines and often their transmissions.

FEATURES

Multiple boom positions and leg extensions provide stability.
Boom swivels 10 degrees right or left when the base cannot be centered under the load.
Floor lock secures the crane while in use.
Electro/hydraulic pump operates on 115 VAC.
8-inch front wheels and 6-inch rear wheels.

SPECS

Capacity at 65 in. boom length	3 tons
Capacity at 81 in. boom length	2-1/2 tons
Capacity at 97 in. boom length	2 tons
Minimum boom height	13 in.
Maximum boom height	149.5 in.
Leg extensions	49 in., 65 in., 81 in.
Power requirement	115 VAC
Shipping weight	1,182 lb

PRODUCT DIMENSIONS

Length	75 in.
Width	51 in.
Height	90.5 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $10,695.00

7.) 81034A - Item No.
NORCO 81034A 3/4 TON CAPACITY UNDER HOIST STAND WITH PEDAL

PRODUCT DETAILS

Under hoist stand with foot pedal, designed to support vehicle components rather than the vehicle. Suited to exhaust system installation, shock absorber replacement, and other tasks that relieve pressure on components.

FEATURES

Lightweight, slender design makes handling easy in close quarters.
Quick-adjust spin handle with thrust bearing eliminates wear and eases turning under load.
Foot pedal adds 1 inch of stroke and 400 pounds of force at the saddle.
Pedal locks in the vertical position for storage or shipment.
Acme threaded screw provides 26-1/4 inches of travel.

SPECS

Capacity	3/4 ton
Saddle size	1.625 in. x 5.25 in.
Shipping weight	40 lb

PRODUCT DIMENSIONS

Low height	55.25 in.
Extended height	81.5 in.
Base diameter	12 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $201.00

8.) 81035A - Item No.
NORCO 81035A 1-1/2 TON CAPACITY UNDER HOIST STAND

PRODUCT DETAILS

Under hoist stand that helps stabilize and support a vehicle raised on an in-ground or above-ground lift. Should be used in pairs.

FEATURES

Designed to be used in pairs.
Adjustment pin chained to the stand secures the support column at six height positions.
Quick-adjust spin handle with thrust bearing eliminates wear and eases turning under load.
Acme threaded screw provides 6-1/2 inches of travel for fine adjustment.
5/8-inch thick rubber saddle pad.

SPECS

Capacity	1-1/2 tons
Saddle size	3.25 in. x 3.25 in.
Shipping weight	48 lb

PRODUCT DIMENSIONS

Low height	48.875 in.
Extended height	85.375 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $198.00

Page 1 of 1 (Showing results 1 - 8 of 8)

« Back to Tools and Equipment Categories