Tools and Equipment - Axle / Truck Jacks

or browse the results below.

Page 1 of 1 (Showing results 1 - 21 of 21)

1.) P103 - Item No.
Pasquin Jack

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

2.) P301 - Item No.
Pasquin P301 Axle Jack 30 ton

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: N/A

Request Quote

3.) P302 - Item No.
Air/Hydraulic Axle Jack 55/33 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

4.) P306 - Item No.
Air/Hydraulic Axle Jack 53/44/35/26.4/17.6/11 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

5.) 72212 - Item No.
NORCO 72212 55 / 37 / 23 / 12 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK

PRODUCT DETAILS

The Norco 72212 is a four-stage telescopic air/hydraulic floor jack rated 55 tons in the first stage, with 37, 23 and 12 ton ratings in the later stages. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

Long T-handle helps position the jack under vehicles with low overhang.
Handle lock holds the handle vertical, at 45 degrees or horizontal.
Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
Rust-inhibitive coating on the rams.
Integrated filter protects the air motor.
Double-acting pump raises the ram faster.
Suspension-loaded axle helps prevent wheel damage.
Vacuum-operated ram retraction means no manual lowering.
Emergency stop button at the top of the handle halts operation immediately.
Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage	55 / 37 / 23 / 12 tons
Type	Telescopic air/hydraulic floor jack
Piston stroke	9.5 in.
Operating pressure range	100-175 psi
Shipping weight	233 lb

PRODUCT DIMENSIONS

Low lift height	6 in.
High lift height	15.375 in.
Length	39.25 in.
Width	8.625 in.
Handle length	61.75 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $4,993.99

6.) 72218 - Item No.
NORCO 72218 33 / 20 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK

PRODUCT DETAILS

The Norco 72218 is a two-stage telescopic air/hydraulic floor jack rated 33 tons and 20 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

50 in. T-handle helps position the jack under vehicles with low overhang.
Handle lock holds the handle vertical, at 45 degrees or horizontal.
Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
Rust-inhibitive coating on the rams.
Integrated filter protects the air motor.
Double-acting pump raises the ram faster.
Suspension-loaded axle helps prevent wheel damage.
Vacuum-operated ram retraction means no manual lowering.
Emergency stop button at the top of the handle halts operation immediately.
Includes 2 in. and 3-15/16 in. stackable extensions with an extension holder.

SPECS

Capacity by stage	33 / 20 tons
Type	Telescopic air/hydraulic floor jack
Piston stroke	6.125 in.
Operating pressure range	120-175 psi
Shipping weight	100 lb

PRODUCT DIMENSIONS

Low lift height	6 in.
High lift height	12 in.
Length	16 in.
Width	6.75 in.
Handle length	49.25 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $2,939.99

7.) 72225 - Item No.
NORCO 72225 50 / 25 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK

PRODUCT DETAILS

The Norco 72225 is a two-stage telescopic air/hydraulic floor jack rated 50 tons and 25 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

Long T-handle helps position the jack under vehicles with low overhang.
Handle lock holds the handle vertical, at 45 degrees or horizontal.
Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
Rust-inhibitive coating on the rams.
Integrated filter protects the air motor.
Double-acting pump raises the ram faster.
Suspension-loaded axle helps prevent wheel damage.
Vacuum-operated ram retraction means no manual lowering.
Emergency stop button at the top of the handle halts operation immediately.
Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage	50 / 25 tons
Type	Telescopic air/hydraulic floor jack
Piston stroke	7.875 in.
Operating pressure range	120-175 psi
Shipping weight	235 lb

PRODUCT DIMENSIONS

Low lift height	8.75 in.
High lift height	16.5 in.
Length	39.25 in.
Width	8.625 in.
Handle length	61.75 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $3,949.00

8.) 72244 - Item No.
NORCO 72244 44 TON CAPACITY AIR OPERATED HYDRAULIC FLOOR JACK

PRODUCT DETAILS

The Norco 72244 is a 44-ton air-operated hydraulic floor jack. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

Long T-handle helps position the jack under vehicles with low overhang.
Handle lock holds the handle vertical, at 45 degrees or horizontal.
Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
Rust-inhibitive coating on the rams.
Integrated filter protects the air motor.
Double-acting pump raises the ram faster.
Suspension-loaded axle helps prevent wheel damage.
Vacuum-operated ram retraction means no manual lowering.
Emergency stop button at the top of the handle halts operation immediately.
Includes a 2-3/4 in. diameter saddle, 2 in. and 4 in. stackable extensions, and an extension holder.

SPECS

Capacity	44 tons
Type	Air-operated hydraulic floor jack
Piston stroke	5.5 in.
Operating pressure range	130-175 psi
Shipping weight	149 lb

PRODUCT DIMENSIONS

Low lift height	9.25 in.
High lift height	15.625 in.
Length	21.625 in.
Width	8.125 in.
Handle length	61.75 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $3,040.00

9.) 72255 - Item No.
NORCO 72255 88 / 55 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK

PRODUCT DETAILS

The Norco 72255 is a two-stage telescopic air/hydraulic floor jack rated 88 tons and 55 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

Long T-handle helps position the jack under vehicles with low overhang.
Handle lock holds the handle vertical, at 45 degrees or horizontal.
Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
Rust-inhibitive coating on the rams.
Integrated filter protects the air motor.
Double-acting pump raises the ram faster.
Suspension-loaded axle helps prevent wheel damage.
Vacuum-operated ram retraction means no manual lowering.
Emergency stop button at the top of the handle halts operation immediately.
Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage	88 / 55 tons
Type	Telescopic air/hydraulic floor jack
Piston stroke	7.5 in.
Operating pressure range	150-175 psi
Shipping weight	235 lb

PRODUCT DIMENSIONS

Low lift height	8.6 in.
High lift height	16.2 in.
Length	38.1 in.
Width	11.4 in.
Handle length	61.75 in.

Click - Download PDF of Drawing

Price: $4,929.99

10.) P152C - Item No.
Air/Hydraulic Axle Jack 30/15 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

11.) P303N - Item No.
P303N Air/Hydraulic Axle Jack 60/40/20 ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: N/A

Request Quote

12.) P304S - Item No.
P304S Air/Hydraulic Axel Jack 58/45/25/13 ton

Click - Download PDF of Drawing

Price: N/A

Request Quote

13.) 72200A - Item No.
Air/Hydraulic Axle Jack 22 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

14.) 72200B - Item No.
Air/Hydraulic Axle Jack 22 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

15.) 72200C - Item No.
Air/Hydraulic Axle Jack 22 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

16.) 72200D - Item No.
NORCO 72200D 22 TON CAPACITY AIR OPERATED HYDRAULIC AXLE JACK

PRODUCT DETAILS

The Norco 72200D is a 22-ton air-operated hydraulic axle jack with a long handle for reaching under low-overhang vehicles. Its compact design fits between tandem wheels, and it ships with three removable saddles and a holder.

FEATURES

Long handle for reaching under vehicles with low overhang.
Load release on the top-mounted handle works in any handle position.
Compact design fits between tandem wheels.
Self-retracting ram eliminates manual lowering.
Rust-inhibitive coating on the ram and extension screw.
Integrated filter protects the air motor; fast-lifting air motor.
Large-diameter wheels for easier maneuvering.
Safety bypass and overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.

SPECS

Capacity	22 tons
Type	Air-operated hydraulic axle jack
Stroke	4.75 in.
Screw extension	4.25 in.
Operating pressure range	85-145 psi
Included adapters	Three removable 2 in. diameter saddles (3/4 in., 2-1/4 in. and 4 in. heights) with handle-mounted holder
Shipping weight	115 lb