Tools and Equipment - Norco

Categories

No image available

Air Jacks

Automotive Lifts

No image available

Axle / Truck Jacks

No image available

Body / Collision Repair Set

End Lifts / Bumper Jacks

Engine Hoist / Shop Crane

Jack Stands / Vehicle Ramps

Lift Tables

Pumps

Pumps - Hand Operated

or browse the results below.

« Previous

Page 4 of 6 (Showing results 151 - 200 of 281)

151.) 76403G - Item No.
LONG BOTTLE JACK 3 TON

**OBSOLETE 12-31-2007**

NOTE: Includes Gauge Hole
Low Lift Height - 24 Inch
High Lift Height - 41.13 Inch
Stroke - 17.3 Inch
Base Size - 4.88 Inch x 4.31 Inch
Carry Handle - None

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

152.) 76412B - Item No.
NORCO 76412B 12-1/2 TON CAPACITY STANDARD HEIGHT BOTTLE JACK

PRODUCT DETAILS

Twelve-and-a-half-ton standard-height bottle jack for heavy-duty truck, agricultural, construction, mining, oil field, mobile home, automotive, and marine applications that call for lifting, pushing, spreading, bending, pressing, or straightening.

FEATURES

Two-piece zinc-plated handle.
Parkerized pump piston, ram, and extension screw resist rust.
No-leak Uniweld construction.
50 percent safety overload factor.
Safety oil bypass system prevents the ram from overextending.
Lightweight forged base places steel only where strength is required.
Built-in carrying handle.

SPECS

Capacity	12-1/2 tons
Low lift height	9.45 in.
High lift height	18.90 in.
Stroke	5.91 in.
Screw extension	3.54 in.
Shipping weight	18 lb

PRODUCT DIMENSIONS

Base size

5.51 in. x 5.51 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $141.06

153.) 76502B - Item No.
NORCO 76502B 2 TON CAPACITY BOTTLE JACK

PRODUCT DETAILS

Two-ton bottle jack for heavy-duty truck, agricultural, construction, mining, oil field, mobile home, automotive, and marine applications that call for lifting, pushing, spreading, bending, pressing, or straightening.

FEATURES

Two-piece zinc-plated handle.
Parkerized pump piston, ram, and extension screw resist rust.
No-leak Uniweld construction.
50 percent safety overload factor.
Safety oil bypass system prevents the ram from overextending.
Lightweight forged base places steel only where strength is required.

SPECS

Capacity	2 tons
Low lift height	7.125 in.
High lift height	14.5 in.
Stroke	4.9375 in.
Screw extension	2.4375 in.
Cylinder inside diameter	0.985 in.
Shipping weight	6 lb

PRODUCT DIMENSIONS

Base size

3.5 in. x 4.125 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $81.14

154.) 76502R - Item No.
2 TON BOTTLE JACK (REFURBISHED)

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $74.00

155.) 76503B - Item No.
NORCO 76503B 3 TON CAPACITY BOTTLE JACK

PRODUCT DETAILS

Three-ton bottle jack for lifting, pushing, spreading, bending, pressing, or straightening in heavy-duty truck, agricultural, construction, mining, oil field, automotive, and marine applications.

FEATURES

Two-piece zinc-plated handle.
Parkerized pump piston, ram, and extension screw resist rust.
No-leak Uniweld construction.
50 percent safety overload factor.
Safety oil bypass system prevents the ram from overextending.
Lightweight forged base places steel only where strength is required.
Internally machined oil passages and close tolerances extend wear life.

SPECS

Capacity	3 tons
Low lift height	7.5 in.
High lift height	15.5625 in.
Stroke	5.25 in.
Screw extension	2.8125 in.
Cylinder inside diameter	1.265 in.
Shipping weight	8 lb

PRODUCT DIMENSIONS

Base size

4 in. x 4.5625 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $84.33

156.) 76505B - Item No.
NORCO 76505B 5 TON CAPACITY BOTTLE JACK

PRODUCT DETAILS

Five-ton bottle jack for heavy-duty truck, agricultural, construction, mining, oil field, mobile home, automotive, and marine applications that call for lifting, pushing, spreading, bending, pressing, or straightening.

FEATURES

Two-piece zinc-plated handle.
Parkerized pump piston, ram, and extension screw resist rust.
No-leak Uniweld construction.
50 percent safety overload factor.
Safety oil bypass system prevents the ram from overextending.
Lightweight forged base places steel only where strength is required.

SPECS

Capacity	5 tons
Low lift height	9.0625 in.
High lift height	18.875 in.
Stroke	6.6875 in.
Screw extension	3.125 in.
Shipping weight	11.5 lb

PRODUCT DIMENSIONS

Base size

4.875 in. x 4.45 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $112.33

157.) 76508A - Item No.
NORCO 76508A 8-TON BOTTLE JACK

PRODUCT DETAILS

8-ton hydraulic bottle jack for heavy-duty truck, agricultural, construction, mining, mobile-home, oil-field, automotive, and marine applications.

FEATURES

Two-piece zinc-plated handle.
Corrosion-resistant treatment on the pump piston, ram, and extension screw.
Welded construction helps prevent leaks.
Safety bypass and overload systems help protect the cylinder.
Carry handle supports transport.

SPECS

Capacity	8 tons
Low lift height	9.06 in.
High lift height	18.75 in.
Stroke	6.5 in.
Screw extension	3.19 in.
Shipping weight	14 lb

PRODUCT DIMENSIONS

Base length	5.38 in.
Base width	5.13 in.

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

158.) 76508B - Item No.
Bottle Jack 8 Ton

PRODUCT DETAILS

8-ton hydraulic bottle jack for heavy-duty truck, agricultural, construction, mining, mobile-home, oil-field, automotive, and marine applications.

FEATURES

Two-piece zinc-plated handle.
Corrosion-resistant treatment on the pump piston, ram, and extension screw.
Welded construction helps prevent leaks.
Safety bypass and overload systems help protect the cylinder.
Carry handle supports transport.

SPECS

Capacity	8 tons
Low lift height	9.06 in.
High lift height	18.75 in.
Stroke	6.5 in.
Screw extension	3.19 in.
Shipping weight	14 lb

PRODUCT DIMENSIONS

Base length

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $133.09

159.) 76512B - Item No.
NORCO 76512B 12-1/2 TON CAPACITY LOW HEIGHT BOTTLE JACK

PRODUCT DETAILS

Twelve-and-a-half-ton low-height bottle jack for heavy-duty truck, agricultural, construction, mining, oil field, mobile home, automotive, and marine applications that call for lifting, pushing, spreading, bending, pressing, or straightening.

FEATURES

Two-piece zinc-plated handle.
Parkerized pump piston, ram, and extension screw resist rust.
No-leak Uniweld construction.
50 percent safety overload factor.
Safety oil bypass system prevents the ram from overextending.
Lightweight forged base places steel only where strength is required.
Built-in carrying handle.

SPECS

Capacity	12-1/2 tons
Low lift height	6.69 in.
High lift height	13.19 in.
Stroke	3.74 in.
Screw extension	2.76 in.
Shipping weight	15 lb

PRODUCT DIMENSIONS

Base size

5.51 in. x 5.51 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $137.67

160.) 76520B - Item No.
Bottle Jack 22 Ton

INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:

Two piece zinc plated handle.
Prevent rust with “Parkerized” pump piston, ram and extension screw.
No leak “Uniweld” construction.
State of the art design reduces repair time.
Longer wear life due to internally machined oil passages, smooth bearing surfaces and
close tolerances.
Lightweight forged base provides more steel only where strength is required.
The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $212.33

161.) 76720B - Item No.
20 Ton Capacity Low Height Air Operated Hydraulic Bottle Jack

INTENDED USE:

For use in heavy duty trucks, farm equipment, building construction, construction and mining equipment, mobile home set-up and oil field applications.

FEATURES:

Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity.
Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system.
Unique design allows for manual operation when air is not available.
Two piece zinc plated handle.
Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust.
Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard.
Carrying handle.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $422.99

162.) 76720C - Item No.
20 Ton Low Air/Hyd. Bottle Jack With Return Springs

INTENDED USE:

For use in heavy duty trucks, farm equipment, building construction, construction and mining equipment, mobile home set-up and oil field applications.

FEATURES:

Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity.
Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system.
Unique design allows for manual operation when air is not available.
Two piece zinc plated handle.
Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust.
Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard.
Carrying handle.

DIMENSIONS:

Low Lift Height	8.25"
High Lift Height	14.5"
Stroke	4"
Screw Extension	2.25"
Base Size	6.44" x 9"
P.S.I. Range	100-130

Price: $555.99

163.) 76721A - Item No.
20 Ton Capacity Ultra Low Height Air Operated Hydraulic Bottle Jack

INTENDED USE:

Made specifically for automobile haulers that use trailers that are very low to the ground.
“Car haulers love our jacks!”

FEATURES:

Made for all applications that require a low lift height.
Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity.
Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system.
Unique design allows for manual operation when air is not available.
Two-piece zinc-plated handle.
Parkerized coating on pump piston and chrome coated ram offer protection against rust.
Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard.
Carrying handle.

DIMENSIONS:

Low Lift Height	7.75"
High Lift Height	11.75"
Stroke	4"
Screw Extension	N/A"
Base Size	6.44" x 9"
P.S.I. Range	100-130
Shipping Weight	36 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $418.00

164.) 76820B - Item No.
22 Ton Capacity Low Height Bottle Jack

INTENDED USE:

FEATURES:

Two piece zinc plated handle.
Prevent rust with “Parkerized” pump piston, ram and extension screw.
No leak “Uniweld” construction.
State of the art design reduces repair time.
Longer wear life due to internally machined oil passages, smooth bearing surfaces and
close tolerances.
Lightweight forged base provides more steel only where strength is required.
The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard.

DIMENSIONS:

Low Lift Height	8.2677"
High Lift Height	14.9606"
Stroke	3.9370"
Screw Extension	2.7559"
Base Size	6.5748" x 6.0630"
Carry Handle	Yes
Shipping Weight	25 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $202.41

165.) 78013B - Item No.
12-1/2 Ton Capacity Hand Pump Operated Shop Press

INTENDED USE:

Straightening, bending & pressing.
Removing & installing gears,
bearings & bushings.

FEATURES:

Welded frame, fully assembled, tested, and ready to put to work.
Manual pump power unit with “Parkerized” pump piston, ram and extension screw to inhibit rust from entering the hydraulic system.
Pair of bed plates included.
Shielded heavy duty ram return springs.
Power unit is bearing mounted for horizontal movement on head channel.
Zero distortion, heavy duty structural steel frame.
Optional equipment below can be used on model 78022D press.

DIMENSIONS:

Ram Travel	5.875"
Min. Throat Height	5"
Max. Throat Height	38.25"
Throat Width	25"
Bed Height Adj.	8 x 4.75"
Between Uprights	5"
Between Bed Rails	6"
Base Width	34"
Base Depth	28"
Overall Height	70.625"
Shipping Weight	266 lbs.

Click - Download PDF of Drawing

Price: $1,379.00

Request Quote

166.) 78022E - Item No.
NORCO 78022E 22 TON CAPACITY HAND PUMP OPERATED SHOP PRESS

PRODUCT DETAILS

Twenty-two-ton hand pump operated shop press for straightening, bending, and pressing, and for removing and installing gears, bearings, and bushings.

FEATURES

Welded frame ships fully assembled, tested, and ready to put to work.
Manual pump power unit with Parkerized pump piston, ram, and extension screw inhibits rust from entering the hydraulic system.
Pair of bed plates is included.
Shielded heavy-duty ram return springs.
Power unit is bearing mounted for horizontal movement on the head channel.
Zero-distortion, heavy-duty structural steel frame.

SPECS

Capacity	22 tons
Ram travel	6.625 in.
Bed height adjustments	7 x 4.75 in.
Between uprights	6 in.
Between bed rails	7 in.
Shipping weight	394 lb

PRODUCT DIMENSIONS

Minimum throat height	7.125 in.
Maximum throat height	35.5 in.
Throat width	30 in.
Base width	40 in.
Base depth	28 in.
Overall height	70.625 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $2,540.43

167.) 78024A - Item No.
NORCO 78024A 25-TON AIR/HYDRAULIC SHOP PRESS

PRODUCT DETAILS

25-ton air/hydraulic shop press for straightening, bending, pressing, and removing or installing gears, bearings, and bushings.

FEATURES

Welded frame is fully assembled and tested.
Air/hydraulic foot pump supports hands-free operation.
Pair of bed plates included.
Self-retracting ram slides horizontally on the head channel.
Heavy-duty structural steel frame.
Liquid-filled gauge measures ram force and internal working pressure.

SPECS

Capacity	25 tons
Ram travel	8 in.
Minimum throat height	6.75 in.
Maximum throat height	40 in.
Throat width	30.5 in.
Bed height adjustment	8 x 4.75 in.
Between uprights	6 in.
Between bed rails	7 in.
Shipping weight	430 lb

PRODUCT DIMENSIONS

Base width	40 in.
Base depth	28 in.
Overall height	76.75 in.

(Air/Hydraulic)

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $2,951.27

168.) 78077A - Item No.
50 Ton Press W/Air/Hydraulic Foot Pump 13 1/4" Stroke

Click - Download PDF of Drawing

Price: N/A

Request Quote

169.) 78090A - Item No.
Car Dolly 3600 Lb. Capacity

INTENDED USE:

For easy movement of vehicles that have been rendered inoperable due to engine/ transaxle removal or other mechanical problems. Frees up lifts and floor jacks for other work to be performed. Used in automobile repair, collision repair, and vehicle inspection applications.

FEATURES:

Supports a vehicle with or without tires.
Allows FWD vehicle to be easily moved in the service bay when drive train has been removed.
Universal design fits any car without the need for additional vehicle adapters.
Quick and independent width and height adjustments. Fully adjustable outriggers to fit any vehicle frame width. Threaded lift saddles with rubber pads are independently adjustable and provide maximum frame protection.
Does not require installation to the subframe or engine/transaxle cradle mounting holes.
Can be used in pairs for maximum maneuverability in tight places.
Four 6” diameter ball bearing mounted swivel caster wheels rated at 900 pounds capacity each.
Two of the four 6” wheels have wheel locks to prevent dolly from moving.

DIMENSIONS:

Height Adjustment	12.75" to 15.75"
Width	17"
Length Adjustment	30" to 60"
Shipping Weight	65 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,046.33

170.) 78100I - Item No.
Engine Stand Imported 1000 Lb. Capacity

INTENDED USE:

For safe handling and positioning
of most automotive engines.

FEATURES:

Fully adjustable engine mounting head.
Long handle and 360 degree rotating head easily position engine.
One bolt disassembles stand for transporting or storage.
Heavy wall tubing prevents excessive frame flex.
Two rigid wheels in back and two swivel caster wheels in front provide maximum stability and support.
Optional equipment:
78109: Transmission Adapter

DIMENSIONS:

Length	37"
Width	34.5"
Height	38"
Finger Adjustment
Height	12"-15.5"
Width	15"-18"
Shipping Weight	87 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $246.67

171.) 78108I - Item No.
1,250 Lbs. Capacity Engine Stand Imported

INTENDED USE:

For safe handling and positioning of most automotive engines, with heavier construction
to handle the largest V8s.

FEATURES:

Fully adjustable engine mounting head.
Long handle and 360 degree rotating head easily position engine.
One bolt disassembles stand for transporting or storage.
Heavy wall tubing prevents excessive frame flex.
Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support.
Four bolts disassemble stand for transporting or storage.
Optional equipment:
78109: Transmission Adapter

DIMENSIONS:

Length	39"
Width	36.5"
Height	39"
Finger Adjustment
Height	12"-15.5"
Width	15"-18"
Shipping Weight	115 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $485.71

Request Quote

172.) 78125A - Item No.
Gear Driven Engine Stand 1250 Lb. Capacity

INTENDED USE:

For safe handling and positioning
of automotive engines weighing
up to 1,250 pounds.

FEATURES:

50:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position.
Fully adjustable engine mounting head.
Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support.
Polyurethane wheels provide protection for expensive tile and epoxy floors.
Telescopic base locks into any one of four different positions to extend the length of the stand for added stability when required.

DIMENSIONS:

Height	42"
Width
Front	21.25"
Rear	40"
Length
From	38.25"
To	53.25"
Shipping Weight	179 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

173.) 78200A - Item No.
Engine Stand 2000 Lb.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

174.) 78204A - Item No.
1000 Lb Truck Mounted Crane w/ Winch

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

175.) 78605A - Item No.
NORCO 78605A 3 TON CAPACITY ELECTRO/HYDRAULIC FLOOR CRANE

PRODUCT DETAILS

Three-ton electro/hydraulic floor crane for lifting heavy items, including the removal and installation of diesel engines and often their transmissions.

FEATURES

Multiple boom positions and leg extensions provide stability.
Boom swivels 10 degrees right or left when the base cannot be centered under the load.
Floor lock secures the crane while in use.
Electro/hydraulic pump operates on 115 VAC.
8-inch front wheels and 6-inch rear wheels.

SPECS

Capacity at 65 in. boom length	3 tons
Capacity at 81 in. boom length	2-1/2 tons
Capacity at 97 in. boom length	2 tons
Minimum boom height	13 in.
Maximum boom height	149.5 in.
Leg extensions	49 in., 65 in., 81 in.
Power requirement	115 VAC
Shipping weight	1,182 lb

PRODUCT DIMENSIONS

Length	75 in.
Width	51 in.
Height	90.5 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $10,695.00

176.) 81004C - Item No.
NORCO 81004C 3 TON CAPACITY JACK STANDS, PAIR

PRODUCT DETAILS

Pair of jack stands, each rated at 3 tons, for automotive use where the vehicle must be supported before making repairs. Stands are intended to be used in pairs.

FEATURES

Spring-loaded pawl provides constant locking pressure against the lifting column.
Four-legged base with foot pads adds strength and secure footing on asphalt.
Common machine bolt secures the lifting column to the stand and adds strength when the stand is lifted by the column.
Recessed column saddle accepts a vehicle panel rail.
Positive lock handle cannot be disengaged until the load is off the saddle column, and doubles as a carrying handle.

SPECS

Capacity (each stand)	3 tons
Low height	12 in.
High height	17.5 in.
Height intervals	0.5625 in.
Saddle size	1.125 in. x 4.625 in.
Shipping weight (pair)	19 lb

PRODUCT DIMENSIONS

Base size

7.5 in. x 7.875 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $72.00

177.) 81022B - Item No.
Trailer Stabilizer Stand USA 20 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $357.75

178.) 81033A - Item No.
NORCO 81033A 3/4 TON CAPACITY UNDER HOIST STAND

PRODUCT DETAILS

Under hoist stand designed to support vehicle components rather than the vehicle. Suited to exhaust system installation, shock absorber replacement, and tasks that relieve pressure on components.

FEATURES

Lightweight, slender design makes handling easy in close quarters.
Quick-adjust spin handle with thrust bearing eliminates wear and eases turning under load.
Acme threaded screw, 1 inch in diameter, provides 26-1/4 inches of travel.
Same basic construction as the 81034A, without the foot pedal.

SPECS

Capacity	3/4 ton
Saddle size	1.625 in. x 5.25 in.
Shipping weight	36 lb

PRODUCT DIMENSIONS

Low height	55.25 in.
Extended height	81.5 in.
Base diameter	12 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $174.00

179.) 81034A - Item No.
NORCO 81034A 3/4 TON CAPACITY UNDER HOIST STAND WITH PEDAL

PRODUCT DETAILS

Under hoist stand with foot pedal, designed to support vehicle components rather than the vehicle. Suited to exhaust system installation, shock absorber replacement, and other tasks that relieve pressure on components.

FEATURES

Lightweight, slender design makes handling easy in close quarters.
Quick-adjust spin handle with thrust bearing eliminates wear and eases turning under load.
Foot pedal adds 1 inch of stroke and 400 pounds of force at the saddle.
Pedal locks in the vertical position for storage or shipment.
Acme threaded screw provides 26-1/4 inches of travel.

SPECS

Capacity	3/4 ton
Saddle size	1.625 in. x 5.25 in.
Shipping weight	40 lb

PRODUCT DIMENSIONS

Low height	55.25 in.
Extended height	81.5 in.
Base diameter	12 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $201.00

180.) 81035A - Item No.
NORCO 81035A 1-1/2 TON CAPACITY UNDER HOIST STAND

PRODUCT DETAILS

Under hoist stand that helps stabilize and support a vehicle raised on an in-ground or above-ground lift. Should be used in pairs.

FEATURES

Designed to be used in pairs.
Adjustment pin chained to the stand secures the support column at six height positions.
Quick-adjust spin handle with thrust bearing eliminates wear and eases turning under load.
Acme threaded screw provides 6-1/2 inches of travel for fine adjustment.
5/8-inch thick rubber saddle pad.

SPECS

Capacity	1-1/2 tons
Saddle size	3.25 in. x 3.25 in.
Shipping weight	48 lb

PRODUCT DIMENSIONS

Low height	48.875 in.
Extended height	85.375 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $198.00

181.) 81205i - Item No.
NORCO 81205I 5 TON CAPACITY LOW PROFILE JACK STANDS, IMPORTED, SET OF 2

PRODUCT DETAILS

Set of two low-profile pin-type jack stands, each rated at 5 tons, designed to support forklifts and heavy machinery. Stands are intended to be used in pairs.

FEATURES

Pin-type support column adjusts to four height positions.
Pins are chamfered for easier insertion into the positioning holes.
Adjustment pin is secured to the stand to prevent loss.
Handle eases positioning and carrying.
9-inch square base secures and stabilizes the load.

SPECS

Capacity (each stand)	5 tons
Low height	9.5 in.
High height	15.75 in.
Height intervals	3 x 2 in.
Saddle size	3 in. x 4.5 in.
Shipping weight (pair)	38 lb

PRODUCT DIMENSIONS

Base size

9 in. x 9 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $171.00

182.) 81208i - Item No.
NORCO 81208I 10 TON CAPACITY SHORT HEIGHT JACK STANDS, PIN TYPE, IMPORTED

PRODUCT DETAILS

Short-height pin-type jack stands, each rated at 10 tons, for fleet garages and agricultural and construction maintenance shops where a pin-type height adjustment column is preferred.

FEATURES

Pin-type support column adjusts to multiple height positions.
Four-legged base made of heavy-schedule 2-inch diameter pipe adds stability.
Intended to be used in pairs.

SPECS

Capacity (each stand)	10 tons
Low height	10.5 in.
High height	17 in.
Height intervals	4 x 1.5 in.
Saddle size	3 in. x 5 in.
Shipping weight (pair)	60 lb

PRODUCT DIMENSIONS

Base size

12.5 in. x 12.5 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $283.29

183.) 81209i - Item No.
NORCO 81209I 10 TON CAPACITY MEDIUM HEIGHT JACK STANDS, PIN TYPE, IMPORTED

PRODUCT DETAILS

Medium-height pin-type jack stands, each rated at 10 tons, for fleet garages and agricultural and construction maintenance shops where a pin-type height adjustment column is preferred.

FEATURES

Pin-type support column adjusts to multiple height positions.
Four-legged base made of heavy-schedule pipe adds stability.
Intended to be used in pairs.

SPECS

Capacity (each stand)	10 tons
Low height	18.5 in.
High height	30 in.
Height intervals	7 x 1.5 in.
Saddle size	3 in. x 5 in.
Shipping weight (pair)	80 lb

PRODUCT DIMENSIONS

Base size

17 in. x 17 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $380.43

184.) 81210i - Item No.
NORCO 81210I 10 TON CAPACITY HIGH HEIGHT JACK STANDS, PIN TYPE, IMPORTED

PRODUCT DETAILS

High-height pin-type jack stands, each rated at 10 tons, for fleet garages and agricultural and construction maintenance shops where a pin-type height adjustment column is preferred.

FEATURES

Pin-type support column adjusts to multiple height positions.
Four-legged base made of heavy-schedule pipe adds stability.
Intended to be used in pairs.

SPECS

Capacity (each stand)	10 tons
Low height	28 in.
High height	47 in.
Height intervals	10 x 2 in.
Saddle size	3 in. x 5 in.
Shipping weight (pair)	106 lb

PRODUCT DIMENSIONS

Base size

16 in. x 16 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $489.00

185.) 81225i - Item No.
NORCO 81225I 25 TON CAPACITY JACK STANDS, PIN TYPE, IMPORTED

PRODUCT DETAILS

Low-profile pin-type jack stands, each rated at 25 tons, for fleet and maintenance garages that support trucks and loaded trailers. Stands are intended to be used in pairs.

FEATURES

Pin-type support column adjusts to four height positions.
Pins are chamfered for easier insertion into the positioning holes.
Adjustment pin is secured to the stand to prevent loss.
Handle eases positioning and carrying.
3/8-inch thick solid steel base plate adds stability.

SPECS

Capacity (each stand)	25 tons
Low height	12 in.
High height	20 in.
Height intervals	3 x 3 in.
Saddle size	2.25 in. x 3.25 in.
Shipping weight (pair)	65 lb

PRODUCT DIMENSIONS

Base size

10 in. x 10 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $340.43

186.) 82002C - Item No.
NORCO 82002C 1-1/2 TON CAPACITY SCISSORS JACK

PRODUCT DETAILS

One-and-a-half-ton scissors jack for passenger car tire changing.

FEATURES

Combination right- and left-hand threaded drive screw raises the jack faster.
Two-piece, extra-long 22.5-inch crank handle eases operation under load, extends reach, and stores conveniently.

SPECS

Capacity	1-1/2 tons
Low height	3.75 in.
High height	13.25 in.
Saddle size	2 in. x 5.125 in.
Shipping weight	10 lb

PRODUCT DIMENSIONS

Base size

4.25 in. x 7.375 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $109.00

187.) 82300D - Item No.
Wheel Dolly Rigid Front Wheels 1 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

188.) 82301D - Item No.
NORCO 82301D 1 TON CAPACITY WHEEL DOLLY, SWIVEL FRONT WHEELS

PRODUCT DETAILS

One-ton wheel dolly with swivel front wheels, designed for removing and installing single, tandem, and duplex tires and wheels.

FEATURES

Swivel casters at the front and rear provide side-to-side maneuverability.
4-inch wheels with polyurethane tread protect the floor.
Lift arms adjust inward for common dual wheel combinations and outward for larger combinations.
Lift arms with ball bearing rollers rotate the rim for bolt pattern alignment.
Lift arms supported at both ends minimize wheel movement.
Adjustable-height push bar provides unobstructed access to the hub area.
Rear caster has 3-1/4 inches of travel adjustment to match the lift arms to the spindle angle.
Safety chain secures the wheel assembly during removal and transport.

SPECS

Capacity	1 ton
Lift travel	7.5 in.
Shipping weight	209 lb

PRODUCT DIMENSIONS

Length	50.5 in.
Width	44.5 in.
Height	39 in.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,621.06

189.) 82302B - Item No.
High Lift Wheel Dolly 1/2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $2,184.00

190.) 86002A - Item No.
48'' Mid Rise Lift

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

191.) 904004 - Item No.
Collision Repair Kit 4 Ton (Made in Taiwan)

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

192.) 904005 - Item No.
Collision Kit 4 Ton (904302 pump, 904304 ram)

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

193.) 910003 - Item No.
Air Operated Hydraulic Pump

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

194.) 910006 - Item No.
Collision Kit 10 Ton (910302 pump, 910304 ram)

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

195.) 910009 - Item No.
Air/Hydraulic Pump

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

196.) 910010 - Item No.
10 Ton Ram, 10'' Stroke, Double Acting

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

197.) 910029 - Item No.
Cylinder 10 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

198.) 910030 - Item No.
10 Ton Capacity Cylinder

12" Stroke

NOTE: Models not shown have same
basic construction as model pictured.

INTENDED USE:

For many applications including shop, agricultural, automotive / truck service needs and construction maintenance applications where lifting, pushing, pulling, bending or holding may be required.

FEATURES:

High flow quick connecting coupler and dust cap included on all models.
Unique piston and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extending and jamming.
Nickel plating on most cylinder pistons inhibits rusting.
Baked enamel exterior finish for increased corrosion resistance.
Polyurethane seals and wipers provide high cycle life.
Heavy duty return springs provide consistent performance.
Cylinders comply with ANSI B 30.1.

DIMENSIONS:

Stroke	12"
Minimum Height	15.75"
Maximum Height	27.75"
Oil Capacity (Cu. In.)	26.76
Shipping Weight	16.5 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $590.00

199.) 910047 - Item No.
10 Ton Capacity Cylinder

14" Stroke

NOTE: Models not shown have same
basic construction as model pictured.

INTENDED USE:

For many applications including shop, agricultural, automotive / truck service needs and construction maintenance applications where lifting, pushing, pulling, bending or holding may be required.

FEATURES:

High flow quick connecting coupler and dust cap included on all models.
Unique piston and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extending and jamming.
Nickel plating on most cylinder pistons inhibits rusting.
Baked enamel exterior finish for increased corrosion resistance.
Polyurethane seals and wipers provide high cycle life.
Heavy duty return springs provide consistent performance.
Cylinders comply with ANSI B 30.1.

DIMENSIONS:

Stroke	14"
Minimum Height	17.75"
Maximum Height	31.75"
Oil Capacity (Cu. In.)	31.22
Shipping Weight	18 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $697.43

200.) 910130 - Item No.
10000 PSI AIR/HYD FOOT PUMP

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

« Previous

Page 4 of 6 (Showing results 151 - 200 of 281)

« Back to Tools and Equipment Manufacturers