Tools and Equipment - Norco

Categories

No image available

Air Jacks

Automotive Lifts

No image available

Axle / Truck Jacks

No image available

Body / Collision Repair Set

End Lifts / Bumper Jacks

Engine Hoist / Shop Crane

Jack Stands / Vehicle Ramps

Lift Tables

Pumps

Pumps - Hand Operated

or browse the results below.

« Previous

Page 2 of 6 (Showing results 51 - 100 of 281)

51.) 76820 - Item No.
Bottle Jack 20 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

52.) 78002 - Item No.
Foldable Engine Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

53.) 78024 - Item No.
Shop Press 25 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

54.) 78050 - Item No.
Shop Press 50 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

55.) 78055 - Item No.
Shop Press 55 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

56.) 78058 - Item No.
Shop Press 50 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

57.) 78077 - Item No.
50 Ton Capacity Air / Hydraulic Pump Operated Shop Press w/ 13 1/4" Stroke

INTENDED USE:

Heavy duty use in truck garages and industrial work shops. Equipped with
an air/hydraulic foot pump and model 910036A 10’ hose.

FEATURES:

Welded frame, fully assembled, tested, and ready to put to work.
Equipped with high speed air/hydraulic foot pump.
Safety overload system protects power unit.
Hand operated winch raises and lowers press bed.
Liquid filled gauge measures ram force in pounds and tons.
Self-retracting ram is bearing mounted for lateral movement on head channel.

DIMENSIONS:

Ram Travel	13.25"
Min. Throat Height	7.5"
Max. Throat Height	32.625"
Throat Width	34.5"
Bed Height Adj.	7 x 5"
Between Uprights	5.625"
Between Bed Rails	7.375"
Base Width	50"
Base Depth	40"
Overall Height	72.75"
Shipping Weight	801 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $6,120.00

Request Quote

58.) 78078 - Item No.
50 Ton Press with Electro/Hydraulic Foot Pump - 13 1/4 Inch Stroke

INTENDED USE:

Heavy duty use in truck garages and industrial work shops. Equipped with model 910052A electro/hydraulic pump and model 910036A 10’ hose.

FEATURES:

Welded frame, fully assembled, tested, and ready to put to work.
Equipped with high speed electro/hydraulic pump.
Safety overload system protects power unit.
Hand operated winch raises and lowers press bed.
Liquid filled gauge measures ram force in pounds and tons.
Self-retracting ram is bearing mounted for lateral movement on head channel.

DIMENSIONS:

Ram Travel	13.25"
Min. Throat Height	7.5"
Max. Throat Height	32.625"
Throat Width	34.5"
Bed Height Adj.	7 x 5"
Between Uprights	5.625"
Between Bed Rails	7.375"
Base Width	50"
Base Depth	40"
Overall Height	72.75"
Shipping Weight	814 lbs.

OPTIONAL EQUIPMENT:

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $8,439.00

Request Quote

59.) 78100 - Item No.
Engine Stand USA 1000 Lb. Capacity

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

60.) 78102 - Item No.
Shop Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

61.) 78106 - Item No.
Foldable Shop Crane 2 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

62.) 78108 - Item No.
1,250 Lbs. Capacity Engine Stand

INTENDED USE:

For safe handling and positioning of most automotive engines, with heavier construction
to handle the largest V8s.

FEATURES:

Fully adjustable engine mounting head.
Long handle and 360 degree rotating head easily position engine.
One bolt disassembles stand for transporting or storage.
Heavy wall tubing prevents excessive frame flex.
Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support.
Four bolts disassemble stand for transporting or storage.
Optional equipment:
78109: Transmission Adapter

DIMENSIONS:

Length	39"
Width	36.5"
Height	39"
Finger Adjustment
Height	12"-15.5"
Width	15"-18"
Shipping Weight	115 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $710.99

Request Quote

63.) 78110 - Item No.
Shop Press 110 Ton (Made in Mexico)

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

64.) 78155 - Item No.
1,250 Lbs. Capacity 75:1 Gear-Driven Engine Stand

INTENDED USE:

For safe handling and positioning
of automotive engines weighing
up to 1,250 pounds.

KEY DIFFERENCE:

The 78155 is a dramatically-improved version of the 78125. Its 75:1 gear box makes turning the heaviest engines effortless! All of the optional engine mounting adapters will work on either model.

FEATURES:

75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position.
Meets the ASME PASE performance and safety standards.
Fully adjustable engine mounting head.
Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support.
Polyurethane wheels provide protection for expensive tile and epoxy floors.
Telescopic base locks into any one of four different positions to extend the length of the stand for added stability when required.

DIMENSIONS:

Height	42"
Width
Front	21.25"
Rear	40"
Length
From	38.25"
To	53.25"
Shipping Weight	223 lbs.

Optional adapters available:

78128: Acura / Honda J35 Engine Mounting Adapter

Click - Download PDF of Drawing

Price: $1,219.00

Request Quote

65.) 78160 - Item No.
3 Ton Capacity Diesel Engine Stand

INTENDED USE:

For safe handling and positioning
of most diesel engines.

FEATURES:

Mounting head tilts for engine clearance in 360 degree rotation.
95 to 1 worm gear drive and long handle provide easy engine rotation.
Floor lock keeps stand from moving during repairs.
Universal adapter included.

DIMENSIONS:

Length	54.25"
Width	50"
Height	45"
Front Wheel Dia.	7"
Rear Wheel Dia.	5.75"
Rotational Clearance From Mtg. Head to Ground	35.25" to 43.25"
Shipping Weight	631 lbs.

Optional engine and transmission mounting adapters:

78162: Detroit Diesel Engine Adapter for 53, 71, and 92 Series Engines.
78163: Cummins Engine Adapter for a Wide Range of Cummins Engines Including:
               NH, NTC, NTE, N14 855, V6 378; 504, 555, and V8 903; In-Line 6 KT 1150M. L10 (Now ISL).
78164: Caterpillar Engine Adapter for In-Line 6 models: 1673, 1674, 1693, 3306, & 3406 engines.
               V8 models: 1100, 3208, and 3408.
78165: IH and Ford Engine Adapter for International Harvester engines: DT-466 In-Line 6 DV-550, MV-404,
               MV-446, V304, V435, V392, 4-152, 4-194, 4-196, 9.0 liter V8. Ford 6.9L and 7.3L Engines.
78166: Mack Engine Adapter for the following In-Line Six Cylinder Engine Series: 672, 673, 675, 711.
78167: Detroit Allison Transmission Adapter for AT, MT, VS, VH, and V730.
78168: Detroit Diesel Engine Adapter for V6 and V8, Series 71 Engines.
78169: Caterpillar Engine Adapter for 3114, 3116, 3176 (Truck or Marine).
78170: Mack Engine Adapter for V8 1000, E6 and E7 In-Line 6 Cylinder Engines.
78172: Volvo Engine Adapter for TD67 (developed 1964), TD71 (developed 1984) Engines.
78173: Detroit Allison Transmission Adapter for HT740D, HT750, HT750CT, CLBT, CR/DR.
78174: Ford New Holland Adapter for 6.6L and 7.8L Engines.
78175: Cummins Engine Adapter for ISX15.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $7,524.00

Request Quote

66.) 78230 - Item No.
2,000 Lbs. Capacity 75:1 Gear-Driven Engine Stand

INTENDED USE:

A twin-post design made for use with automobile, light-duty truck, and medium-duty truck engines and transmissions.

KEY DIFFERENCE:

The 78230 is a dramatically-improved version of the 78200. Its 75:1 gear box makes turning the heaviest engines effortless! All of the optional engine mounting adapters will work on either model.

FEATURES:

75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position.
Meets the ASME PASE performance and safety standards.
Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support.
Polyurethane wheels provide protection for expensive tile and epoxy floors.
Includes two universal mounting plates, rotating shaft, eight fully adjustable arms and all the related mounting hardware.
Rotating shaft with mounting plate telescopes inside the post receiver for fine adjustment when mounting ends or sides of engines. Mounting plates can be adjusted 36-1/4” apart.

DIMENSIONS:

Height	42"
Width
Front	21.25"
Rear	40"
Length
From	38.25"
To	53.25"
Shipping Weight	315 lbs.

Optional adapters available:

78201: Ford 6.0L and 6.4L Engine Mounting Adapter
78202: Ford 6.2L Engine Mounting Adapter
78203: Ford 6.7L Engine Mounting Adapter
78208: Dodge Cummins 6.7L Engine Mounting Adapter

Click - Download PDF of Drawing

Price: $1,804.00

Request Quote

67.) 78600 - Item No.
Shop Hoist 3 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

68.) 79325 - Item No.
Rolling Lift Bridge 2-1/2 Ton (Manual Hydraulic)

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

69.) 79335 - Item No.
3 Ton Capacity Air / Hydraulic Pump Operated Rolling Lift Bridge

NOTE: To achieve maximum lifting capacity, the lifting surface must be raised at least 3.25” higher than its lowest point.

NOTE: The model 79326D flat-end or model 79327D hook-end adapter kits must be ordered separately to connect the universal mounting bracket to the pit/lift rails.

INTENDED USE:

Used in narrow quick lube pit applications or in conjunction with above ground lifts. The bridge straddles the lift rails and raises the vehicle’s tires off the rails for wheel alignment, brake, tire and suspension work. This model is the choice for Valvoline Instant Oil Change locations.

DIMENSIONS:

Stroke	9"
Length	34.6875"
Width	21.5"
Height	9.375"
Shipping Weight	326 lbs.

FEATURES:

Push button air/hydraulic pump provides safe, quick lifting up to 9” which allows for a maximum lift height of 18-3/8" when using both adapters and extension screw extended.
The lifting pads safely support the vehicle on the bridge and the adjustable lift arms span up to 62-13/16”.
Universal mounting brackets adjust to a lift rail range of 32" to 46-1/2”.
Flat-end and hook-end adapter brackets are equipped with spring-loaded roller bearings for
smooth maneuverability of bridge on lift rails. These brackets are sold separately.
Mechanical stop prevents accidental lowering of bridge.
Lowering is accomplished with one hand on the release lever and the other hand releasing the mechanical stop.
Equipped with rubber faced saddles for differential lifting.
Included lift adapters: (2) 3-1/2” Adapters, (2) 5” Adapters, and (2) Padded Saddles w/ Extension Screws
Available mounting adapters:
79326D: Flat-End Adapter Bracket Kit
79327D: Hook-End Adapter Bracket Kit
Overall width from outside edge of lift pad:
- Arms retracted: 34-11/16”
- Arms extended: 62-13/16”

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $4,683.29

Request Quote

70.) 79345 - Item No.
3 Ton Capacity Air / Hydraulic Pump Operated Electric Vehicle Rolling Lift Bridge

INTENDED USE:

Used in quick lube pit applications or in conjunction with above ground lifts. It has lift arms that are wider than our other bridges to meet the needs of wide electric vehicles. This bridge straddles the lift rails and raises the vehicle’s tires off the rails for wheel alignment, brake, tire and suspension work.

DIMENSIONS:

Stroke	9"
Length	35.75"
Width	21.5"
Height	9.5625"
Shipping Weight	350 lbs.

FEATURES:

Push button air/hydraulic pump provides safe, quick lifting up to 9” which allows for a maximum lift height of 19-7/8" when using both adapters and extension screw extended.
The lifting pads safely support the vehicle on the bridge and the adjustable lift arms span up to 71-5/8”.
Universal mounting brackets adjust to a lift rail range of 32" to 46-1/2”.
Flat-end and hook-end adapter brackets are equipped with spring-loaded roller bearings for
smooth maneuverability of bridge on lift rails. These brackets are sold separately.
Mechanical stop prevents accidental lowering of bridge.
Lowering is accomplished with one hand on the release lever and the other hand releasing the mechanical stop.
Equipped with rubber faced saddles for differential lifting.
Included lift adapters: (2) 3-1/2” Adapters, (2) 5” Adapters, and (2) Padded Saddles w/ Extension Screws
Available mounting adapters:
79326D: Flat-End Adapter Bracket Kit
79327D: Hook-End Adapter Bracket Kit
Overall width from outside edge of lift pad:
- Arms retracted: 36-11/16”
- Arms extended: 71-5/8”

Click - Download PDF of Drawing

Price: $4,020.00

Request Quote

71.) 81012 - Item No.
12 Ton Capacity Jack Stands

INTENDED USE:

Fleet garages, agricultural and
construction maintenance shops.

FEATURES:

Unique spring loaded pawl provides constant locking pressure against lifting column.
Four legged base with foot pads for added strength and a more secure footing on asphalt.
Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

DIMENSIONS:

Low Height	19.625"
High Height	29.375"
Height Intervals	1.25"
Base Size	13" x 15"
Saddle Size	1.625" x 4.75"
Shipping Weight	86 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $355.00

72.) 81036 - Item No.
Under Hoist Jack 1 Ton

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

73.) 81050 - Item No.
50 Ton Capacity Trailer Stabilizing Stand

INTENDED USE:

To stabilize and assist in supporting
the front or rear end of a loaded or
unloaded tractorless trailer.

FEATURES:

Designed to meet the performance and safety requirements of the ASME PASE.
Meets OSHA requirements for stabilizing loaded and unloaded trailers.
100,000 lb. static load capacity.
15,000 lb. lifting capacity.
Adjusts from 39” to 51”.
Wide 14” diameter base for added stability.
8” diameter top plate.
Removable pipe handle.

DIMENSIONS:

Low Height	39"
Extended Height	51"
Base Size	14" Dia.
Saddle Size	8" Dia.
Shipping Weight	152 lbs.

Click - Download PDF of Drawing

Price: $766.00

Request Quote

74.) 81205 - Item No.
5 Ton Capacity Jack Stands

INTENDED USE:

Low profile design in order to support
forklifts and heavy machinery.

FEATURES:

Pin type support column adjusts to four different height positions.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Handle provides ease of positioning and carrying.
9” square base secures and stabilizes load.
Each stand sold individually
5 Tons Each stand

DIMENSIONS:

Low Height	9.5"
High Height	15.75"
Height Intervals	3 x 2"
Base Size	9" x 9"
Saddle Size	3" x 4.5"
Shipping Weight	38 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $319.00

75.) 81208 - Item No.
10 Ton Capacity Short Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.
10 Tons each stand
Each stand sold individually

DIMENSIONS:

Low Height	10.5"
High Height	17"
Height Intervals	4 x 1.5"
Base Size	12.5" x 12.5"
Saddle Size	3" x 5"
Shipping Weight	60 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $523.40

76.) 81209 - Item No.
10 Ton Capacity Medium Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.
10 Tons each stand
Each stand sold separately

DIMENSIONS:

Low Height	18.5"
High Height	30"
Height Intervals	7 x 1.5"
Base Size	17" x 17"
Saddle Size	3" x 5"
Shipping Weight	80 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $660.43

77.) 81210 - Item No.
10 Ton Capacity High Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.

DIMENSIONS:

Low Height	28"
High Height	47"
Height Intervals	10 x 2"
Base Size	16" x 16"
Saddle Size	3" x 5"
Shipping Weight	106 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $820.43

Request Quote

78.) 81225 - Item No.
25 Ton Capacity Jack Stands

INTENDED USE:

Fleet and maintenance garages where low profile stands are used to support trucks and loaded trailers.

FEATURES:

Pin type support column adjusts to four different height positions.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Handle provides ease of positioning and carrying.
3/8” thick solid steel base plate for added stability.
25 tons each stand

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $573.29

79.) 82001 - Item No.
Hydraulic Scissors Jack 1,760 Lbs

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

80.) 82019 - Item No.
20 Ton Capacity Pair of Truck Ramps (10 Ton Each Ramp)

INTENDED USE:

Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

Handles tires with up to 10” tread widths.
Telescopic 34" T-handle extends and lifts up to expose wheels for easy
maneuverability around the shop. Retracts for easy storage.
Perforated holes in ramps provide traction for the tires.
Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

DIMENSIONS:

Length	48.25"
Width	12.625"
Height	9"
Shipping Weight	204 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,641.86

Request Quote

81.) 82020 - Item No.
20 Ton Capacity Pair of Wide Truck Ramps (10 Ton Each Ramp)

INTENDED USE:

Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

Handles tires with up to 16” tread widths.
Telescopic 34" T-handle extends and lifts up to expose wheels for easy
maneuverability around the shop. Retracts for easy storage.
Perforated holes in ramps provide traction for the tires.
Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

DIMENSIONS:

Length	50.5"
Width	18.375"
Height	9.25"
Shipping Weight	346 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,198.00

Request Quote

82.) 82304 - Item No.
1/2 Ton Capacity Air / Hydraulic High Lift Wheel Dolly

INTENDED USE:

This uniquely crafted wheel lift is designed for the removal and installation of single, tandem, and duplex tires and wheels which are mounted on trucks that are supported above ground level.

FEATURES:

The unique, open-chassis design allows for much easier alignment than with the center post designs of our competition.
Air-operated pump allows the unit to lift the load effortlessly.
Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.
7” of side to side lift arm adjustment allows for the easy alignment of the rim’s lug holes with the wheel.
1,000 pound capacity.
A hydraulic jack provides tilt to the lift arms for easy alignment.
Safety chain provided to secure tires and wheels to the dolly.
Maneuverability is made easy by means of two rear mounted ball bearing swivel casters. The caster wheels include a locking mechanism which can prevent the dolly from moving.

DIMENSIONS:

Lift Height
Low	2.125"
High	39.5"
Lift Arms
Width	30.875"
Length	22.125"
Tilt Angle	-2° to +30°
Side to Side Adj.
Left	2.5"
Right	4.5"
Overall Dimensions
Length	49.625"
Width	44.625"
Height	69.875"
Shipping Weight	476 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $3,863.60

83.) 82305 - Item No.
300 lbs Tire Lift

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

84.) 82306 - Item No.
Pneumatic Powered Wheel Lift - 200lb Capacity

Single Tire/Wheel Lift

INTENDED USE:

To safely assist a technician with the removal and installation of single wheels on vehicles that are supported on a lift.

FEATURES:

Need help lifting tire/wheel assemblies onto wheel balancers of tire turntables? This is the perfect tool to reduce shop lifting injuries.
Maneuverability is made easy by means of four swivel caster wheels. Two rear caster wheels include a locking mechanism which can prevent the dolly from moving.
Unique offset design offers open access from the rear to mount wheel to the vehicle.
Onboard rollers make for easy stud-to-hole alignment.
Air-operated pump allows the unit to lift the load effortlessly.
6 1/4” low height of lift arms.
Built-in tray for holding lug nuts.

DIMENSIONS:

Lift Travel	35"
Lift Height
Low	4.5"
High	40.5"
Lift Arms
Width	14”
Length	11”
Overall Dimensions
Length	36"
Width	35"
Height	58"
Shipping Weight	210 lbs.

Price: $1,165.06

85.) 82310 - Item No.
Single Tire Handler Dolly - Narrow

Narrow Model

INTENDED USE:

To provide added leverage to easily remove or install truck tire-and-wheel assemblies.

FEATURES:

Heavy-duty tubular steel construction capable of handling 300 pounds.
Easy grip handle along with improved “bent arm” design improves leverage for easier installation and minimizes back strain.
Steel alignment rollers allow simple alignment of the wheel to the wheel studs.
Spring-loaded kickstand offers convenient storage.
Can accommodate tire diameters from 24" to 36".

DIMENSIONS:

Handles Tires	24" - 36"
Length	42.5"
Width	24.75"
Shipping Weight	19 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $134.00

86.) 82312 - Item No.
26" Single Tire Handler Dolly - Wide Model

INTENDED USE:

To provide added leverage to easily remove or install truck tire-and-wheel assemblies.

FEATURES:

Heavy-duty tubular steel construction capable of handling 300 pounds.
Easy grip handle along with improved “bent arm” design improves leverage for easier installation and minimizes back strain.
Steel alignment rollers allow simple alignment of the wheel to the wheel studs.
Spring-loaded kickstand offers convenient storage.
Can accommodate tire diameters from 36" to 48".

DIMENSIONS:

Handles Tires	36" - 48"
Length	41"
Width	32"
Shipping Weight	22 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $154.00

87.) 82320 - Item No.
3/4 Ton Capacity Wheel Dolly

INTENDED USE:

For the removal and installation of single, tandem and duplex tires and wheels.

FEATURES:

Dolly handles any tire diameter and up to 1500 lbs. combined tire and wheel weight.
Three 4” diameter swivel ball bearing caster wheels provide easy maneuverability and positioning.
Travel adjustment on rear locking caster wheel matches lifting arms with spindle angle.
6’ chain included to secure wheel assembly to dolly during removal and transport.
Quick disconnect push/pull handle provides unobstructed access to hub area.

DIMENSIONS:

Lift Travel	4.75"
Lift Arms
Spread	26"
Length	24.5"
Overall Dimensions
Length	43.5"
Width	39.5"
Height	35"
Shipping Weight	175 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,072.82

88.) 82920 - Item No.
Air Lift Jack, End Lift 2-1/2 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

89.) 82925 - Item No.
Air Lift Jack 2-1/2 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

90.) 82950 - Item No.
Portable Air Lift Jack 5 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

91.) 82990 - Item No.
Portable Air Lift Jack 10 Ton, Made in the USA

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

92.) 82992 - Item No.
15 Ton Capacity Portable Air Lift Jack

INTENDED USE:

Garages / repair shops of truck, farm equipment, construction equipment and bus companies. May be used in pairs. Ideal for crowded conditions that require single point contact.

FEATURES:

Three-way heavy duty air valve provides fine control when lifting or lowering a load.
Extension tubes and detent pins offer multiple lifting heights.
Unit easily maneuvered on two 8” diameter rubber tread wheels.
Removable handle and 8’ air hose for remote safe positioning and operation.
Lifting saddle with locating lugs.

DIMENSIONS:

Low Lift Height	18.125"
High Lift Height	51.375"
Stroke	11.25"
Length	59.5"
Width	15"
Height	36.875"
Shipping Weight	240 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,785.67

Request Quote

93.) 82995 - Item No.
8 1/2 Ton Capacity Long Reach Air Lift Jack

INTENDED USE:

For truck, bus, farm equipment and motor home applications where a long reach jack is required to lift at the vehicle bumper, frame or front axle.

FEATURES:

Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle.
Automatic safety lock engages in five different height positions independent of air pressure.
Includes extension tubes and adjustment pins for added height requirements.
Two 10” diameter solid wheels are strategically located for better positioning and maneuverability.
Scissors action frame design with four 5” diameter steel wheels provides maximum stability during lifting and lowering.
Large air cylinder requires only 100 p.s.i. air pressure to lift 5 ton capacity.
Over four feet of reach between cylinder and center line of lifting saddle.

DIMENSIONS:

Low Lift Height	10"
High Lift Height	50"
Length	80.5"
Width	38"
Height	53.75"
Saddle Reach	50"
Shipping Weight	935 lbs.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $8,064.00

Request Quote

94.) 82999 - Item No.
10 Ton Capacity Air Lift Jack

INTENDED USE:

Truck and farm equipment dealer garages, heavy duty construction repair shops and bus company garages.

FEATURES:

Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle.
Automatic safety lock engages in six different height positions independent of air pressure.
Designed for lifting entire front or rear of a vehicle.
Front swivel caster wheel and two 12-1/4” diameter pneumatic rear tires provide easy maneuverability.
Adjustable lifting saddles can be raised and extended to desired position.

DIMENSIONS:

Low Lift Height	12.5"
High Lift Height	50"
Length	40.5"
Width	35.5"
Height	65.75"
Saddle Reach	14.75"
Shipping Weight	638 lbs.

NOTE: Additional Freight Fees apply to deliver to residential areas.
NOTE: Additional Freight Fees apply if a liftgate is required to unload the freight.
NOTE: The receiver will need either a loading dock or a forklift onsite to unload the freight, otherwise they will need liftgate delivery services.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $5,459.00

Request Quote

95.) 86000 - Item No.
Mid-Rise Lift 3 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

96.) 86002 - Item No.
Mid-Rise Lift 3 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

97.) 86006 - Item No.
Mid-Rise Lift 3 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

98.) BG-A2 - Item No.
Floor Jack 1-1/4 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

99.) YM300 - Item No.
Hydraulic Floor Jack 3 Ton (Made in Japan)

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

100.) 103733 - Item No.
Floor Jack 1-1/4 Ton

Click - Download PDF of Drawing

Price: Discontinued

This product has been discontinued.

« Previous

Page 2 of 6 (Showing results 51 - 100 of 281)

« Back to Tools and Equipment Manufacturers

Tools and Equipment - Norco

Categories

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

OPTIONAL EQUIPMENT:

INTENDED USE:

FEATURES:

DIMENSIONS:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:A twin-post design made for use with automobile, light-duty truck, and medium-duty truck engines and transmissions.

KEY DIFFERENCE:The 78230 is a dramatically-improved version of the 78200. Its 75:1 gear box makes turning the heaviest engines effortless! All of the optional engine mounting adapters will work on either model.

FEATURES:

DIMENSIONS:

FEATURES:

FEATURES:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

Single Tire/Wheel Lift

INTENDED USE:

FEATURES:

DIMENSIONS:

Narrow Model

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

FEATURES:

DIMENSIONS:

INTENDED USE:

A twin-post design made for use with automobile, light-duty truck, and medium-duty truck engines and transmissions.

KEY DIFFERENCE:

The 78230 is a dramatically-improved version of the 78200. Its 75:1 gear box makes turning the heaviest engines effortless! All of the optional engine mounting adapters will work on either model.