Tools and Equipment - Floor Jacks

PRODUCT DETAILS

The AC Hydraulic 150-1 is a 150 ton heavy duty air hydraulic jack built in Denmark for heavy mining and construction machinery. It lifts from 27.56 in. to 43.31 in. and runs on shop compressed air.

FEATURES

• Working range of 27.56 in. to 43.31 in.
• All-steel, heavy-duty chassis built for harsh working conditions
• Large rubber tires for positioning on rough surfaces
• Chassis design allows on-site jack repair and wheel changes
• Multi-position handle that tilts back for transport
• Safety valve protects against overload, load loss and loss of hydraulic fluid
• Dead man's control handle for safer lifting and lowering
• Two lifting eyes for handling with a crane or hoist

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 71340 is a 3-ton high/low floor jack with a low starting height and a tall maximum lift. A dual pump piston design reaches maximum height in 6 pump strokes.

FEATURES

• Safety bypass and overload systems protect the cylinder and keep the jack within the ASME/PASE load-limiting standard.
• Heavy-duty chassis.
• Two-piece handle for easier shipping and storage.
• U-joint release mechanism for more precise lowering control.
• Foam handle sleeve included to protect vehicles.
• Dual pump piston reaches maximum height in 6 pump strokes.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72212 is a four-stage telescopic air/hydraulic floor jack rated 55 tons in the first stage, with 37, 23 and 12 ton ratings in the later stages. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

• Long T-handle helps position the jack under vehicles with low overhang.
• Handle lock holds the handle vertical, at 45 degrees or horizontal.
• Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
• Rust-inhibitive coating on the rams.
• Integrated filter protects the air motor.
• Double-acting pump raises the ram faster.
• Suspension-loaded axle helps prevent wheel damage.
• Vacuum-operated ram retraction means no manual lowering.
• Emergency stop button at the top of the handle halts operation immediately.
• Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72225 is a two-stage telescopic air/hydraulic floor jack rated 50 tons and 25 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

• Long T-handle helps position the jack under vehicles with low overhang.
• Handle lock holds the handle vertical, at 45 degrees or horizontal.
• Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
• Rust-inhibitive coating on the rams.
• Integrated filter protects the air motor.
• Double-acting pump raises the ram faster.
• Suspension-loaded axle helps prevent wheel damage.
• Vacuum-operated ram retraction means no manual lowering.
• Emergency stop button at the top of the handle halts operation immediately.
• Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72255 is a two-stage telescopic air/hydraulic floor jack rated 88 tons and 55 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

• Long T-handle helps position the jack under vehicles with low overhang.
• Handle lock holds the handle vertical, at 45 degrees or horizontal.
• Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
• Rust-inhibitive coating on the rams.
• Integrated filter protects the air motor.
• Double-acting pump raises the ram faster.
• Suspension-loaded axle helps prevent wheel damage.
• Vacuum-operated ram retraction means no manual lowering.
• Emergency stop button at the top of the handle halts operation immediately.
• Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic B25-2 is a compact, portable two-stage air hydraulic jack for service vans, with a 25 ton first stage and a 10 ton second stage. It weighs only about 62 lb and the handle doubles as a carrying grip.

FEATURES

• Portable two-stage design for service vans
• Compact design with no loose tubes, handles or valves
• Handle can be used for carrying, lifting, lowering and maneuvering
• Hard chrome-plated piston rod for long service life
• Built-in safety overload valve
• Hand-operated dead man's control for safer lifting and lowering
• Air-powered pump for fast lifting with little effort

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic DK20Q is a 2 ton low profile garage jack built in Denmark for passenger cars and vans. It adds a quick-lift pedal to the DK20 so the saddle reaches the lifting point in just a few pumps, and its 3.15 in. entry height suits low cars.

FEATURES

• Very low minimum height for cars with low clearance
• Wide, sturdy high-strength steel frame for stable lifting
• Hard chrome-plated cylinder for long service life and minimal maintenance
• Quick-lift pedal reaches the lifting point fast
• Precise, controlled lowering
• Manual dead man's release for safer lowering
• Built-in safety overload valve
• Quiet wheels with polyurethane O-ring surfaces protect the floor
• Ergonomic handle for a firm, secure grip

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic DK60Q is a 6 ton quick-lift hydraulic service jack built in Denmark for trucks and heavy machinery. It lifts from 5.51 in. to 23.62 in. on a wide, robust steel frame.

FEATURES

• Low minimum height of 5.51 in. for heavy vehicles
• Wide, sturdy high-strength steel frame for stable lifting
• Hard chrome-plated cylinder for long service life and minimal maintenance
• Quick-lift pedal reaches the lifting point fast
• Precise, controlled lowering
• Manual dead man's release for safer lowering
• Built-in safety overload valve
• Optional pneumatic tires for easier maneuvering
• Ergonomic handle for a firm, secure grip

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic 100-1H is a 100 ton heavy duty air hydraulic jack built in Denmark for high-clearance mining and construction machinery. It lifts from 37.40 in. to 62.99 in. and runs on shop compressed air.

FEATURES

• Tall working range of 37.40 in. to 62.99 in. for high-clearance machinery
• All-steel, heavy-duty chassis built for harsh working conditions
• Large rubber tires for positioning on rough surfaces
• Chassis design allows on-site jack repair and wheel changes
• Multi-position handle that tilts back for transport
• Safety valve protects against overload, load loss and loss of hydraulic fluid
• Dead man's control handle for safer lifting and lowering
• Two lifting eyes for handling with a crane or hoist

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic 150-1L is a 150 ton heavy duty air hydraulic jack built in Denmark for low-clearance mining and construction machinery. It lifts from 17.13 in. to 22.44 in. and runs on shop compressed air.

FEATURES

• Low minimum height of 17.13 in. for low-clearance machinery
• All-steel, heavy-duty chassis built for harsh working conditions
• Large rubber tires for positioning on rough surfaces
• Chassis design allows on-site jack repair and wheel changes
• Multi-position handle that tilts back for transport
• Safety valve protects against overload, load loss and loss of hydraulic fluid
• Dead man's control handle for safer lifting and lowering
• Two lifting eyes for handling with a crane or hoist

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 71000D is a 10-ton floor jack with the FASTJACK mechanism, which raises the saddle to the load in one pump of the T handle. It is built for heavy-duty truck, construction and agricultural equipment maintenance.

FEATURES

• FASTJACK mechanism raises the lifting saddle to the load in one pump of the T handle.
• Locking release lever holds the handle vertical, at 45 degrees or horizontal and lowers the load.
• Chromed ram and dust seals guard against hydraulic contamination.
• Safety bypass and overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
• U.S. Patent No. 7,055,801 B2.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 71100A is a 10-ton air/hydraulic floor jack with the FASTJACK feature, which raises the saddle to the load with one pump of the T handle. It is built for heavy-duty truck, construction and agricultural equipment maintenance garages.

FEATURES

• FASTJACK feature raises the lifting saddle to the load with one pump of the T handle.
• Chrome-plated ram and dust seals help keep contaminants out of the hydraulic system.
• Safety bypass and overload systems protect the cylinder and keep the jack within the ASME/PASE load-limiting standard.
• Air pump models can also be operated manually.
• Locking release lever holds the handle in the vertical, 45-degree or horizontal position to lower the load.

SPECS

PRODUCT DIMENSIONS