Tools and Equipment - Wheel Lifts

or browse the results below.

Page 1 of 1 (Showing results 1 - 4 of 4)

1.) 82304 - Item No.
Manufacturer: Norco

NORCO 82304 1/2 TON CAPACITY AIR/HYDRAULIC HIGH LIFT WHEEL DOLLY

PRODUCT DETAILS

The Norco 82304 is a 1/2 ton air/hydraulic high-lift wheel dolly for single, tandem and duplex tires and wheels on trucks raised above ground level. Its open-chassis design makes alignment easier than center-post dollies.

FEATURES

Open-chassis design makes alignment easier than center-post dollies.
Air-operated pump for effortless lifting.
Heavy-duty lift arms with ball-bearing conveyor rollers rotate wheels to align the bolt pattern.
Side-to-side arm adjustment totaling 7 in. aligns rim lug holes.
Hydraulic jack tilts the lift arms.
Safety chain secures the tire and wheel to the dolly.
Two rear ball-bearing swivel casters with locks.

SPECS

Capacity	1,000 lb. (1/2 ton)
Type	Air/hydraulic high-lift wheel dolly
Arm tilt angle	-2 to +30 degrees
Side-to-side adjustment	2.5 in. left / 4.5 in. right
Shipping weight	476 lb

PRODUCT DIMENSIONS

Low lift height	2.125 in.
High lift height	39.5 in.
Lift arms width	30.875 in.
Lift arms length	22.125 in.
Overall length	49.625 in.
Overall width	44.625 in.
Overall height	69.875 in.

Product image of Norco 82304 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $3,863.60

2.) 82305 - Item No.
Manufacturer: Norco

300 lbs Tire Lift

Product image of Norco 82305 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: Discontinued

This product has been discontinued.

3.) 82306 - Item No.
Manufacturer: Norco

NORCO 82306 200 LBS. CAPACITY SINGLE TIRE/WHEEL LIFT

PRODUCT DETAILS

The Norco 82306 is a 200 lb. capacity air-operated single tire/wheel lift. It helps technicians lift and position wheels onto vehicles on a lift, or tire and wheel assemblies onto wheel balancers and tire turntables.

FEATURES

Four swivel casters for maneuvering; the two rear casters lock.
Offset design gives rear access for mounting the wheel to the vehicle.
Onboard rollers help align the wheel studs with the hub holes.
Air-operated pump raises the load with little effort.
Support legs have a 6-1/4 in. low profile.
Built-in tray holds lug nuts.

SPECS

Capacity	200 lb.
Type	Air-operated tire/wheel lift
Lift travel	35 in.
Shipping weight	210 lb

PRODUCT DIMENSIONS

Low lift height	4.5 in.
High lift height	40.5 in.
Lift arms (W x L)	14 in. x 11 in.
Overall length	36 in.
Overall width	35 in.
Overall height	58 in.

Product image of Norco 82306 on HCRCnow.com.

Price: $1,165.06

4.) 82320 - Item No.
Manufacturer: Norco

NORCO 82320 3/4 TON WHEEL DOLLY

PRODUCT DETAILS

The Norco 82320 is a 3/4 ton wheel dolly, assembled in the U.S.A., for removing and installing single, tandem and duplex tires and wheels. It handles any tire diameter, up to 1,500 lb. of combined tire and wheel weight.

FEATURES

Accommodates any tire diameter for single, tandem and duplex tires and wheels.
Three 4 in. swivel ball-bearing casters for maneuverability.
Adjustable travel on the rear locking caster aligns the lift arms with the spindle angle.
Includes a 6 ft. chain to secure the wheel assembly during removal and transport.
Quick-disconnect push/pull handle gives clear access to the hub area.

SPECS

Capacity	3/4 ton
Maximum combined tire and wheel weight	1,500 lb.
Lift travel	4.75 in.
Casters	Three 4 in. swivel ball-bearing
Shipping weight	175 lb

PRODUCT DIMENSIONS

Lift arms spread	26 in.
Lift arms length	24.5 in.
Overall length	43.5 in.
Overall width	39.5 in.
Overall height	35 in.

Product image of Norco 82320 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,072.82

Page 1 of 1 (Showing results 1 - 4 of 4)

« Back to Tools and Equipment Categories