Tools and Equipment - Forklift Jacks

or browse the results below.

Page 1 of 1 (Showing results 1 - 6 of 6)
1.) FJ40 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC FJ40 4 TON SCISSOR / 5 TON CYLINDER FOLDABLE FORKLIFT JACK


PRODUCT DETAILS

The AC Hydraulic FJ40 is a foldable floor jack for forklifts, agricultural equipment and industrial machinery. It has two lifting ranges, a 4 ton scissor lift that starts at only 2.17 in. and a 5 ton cylinder lift that reaches 28.74 in., and it folds for storage and transport, including on service trucks.

FEATURES

  • Extremely low minimum height of 2.17 in. in scissor mode
  • Two lifting modes: 4 ton scissor lift and 5 ton cylinder lift
  • Foldable for easier storage and transport, including on service trucks
  • Wide, robust frame of high-strength steel
  • Controlled, precise lowering
  • Built-in safety overload valve

SPECS

Capacity8,800 lb (4 ton) scissor / 11,000 lb (5 ton) cylinder
Minimum height2.17 in. scissor / 16.14 in. cylinder
Maximum height17.91 in. scissor / 28.74 in. cylinder
Shipping weight95 lb

PRODUCT DIMENSIONS

Frame length31.89 in.
Width9.84 in.
Frame height3.94 in.
Handle length32.68 in.



Product image of AC Hydraulic FJ40 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $1,378.87
2.) 72036A - Item No.
Manufacturer: Norco

Forklift Jack 5 Ton


Product image of Norco 72036A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
3.) 72036B - Item No.
Manufacturer: Norco

Forklift Jack 5 Ton


Product image of Norco 72036B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
4.) 72036D - Item No.
Manufacturer: Norco

NORCO 72036D 4 TON CAPACITY FORKLIFT JACK


PRODUCT DETAILS

Four-ton forklift jack with a profile low enough to raise forklifts.

FEATURES

  • Serrated saddle for flat surfaces rotates out of the way so edged surfaces can be raised in the rounded lift arm cutout.
  • 30-inch removable handle eases pumping and storage.
  • Fingertip-control release knob provides slow, controlled lowering.
  • Safety bypass and overload systems protect the cylinder and prevent use beyond the load-limiting standard.

SPECS

Capacity4 tons
Low lift height (saddle)2.5 in.
Low lift height (cutout)2.375 in.
High lift height16.5 in.
Handle length30 in.
Shipping weight77 lb

PRODUCT DIMENSIONS

Length30.25 in.
Width8.375 in.



Product image of Norco 72036D on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $748.00
5.) 72036C (Late Version) - Item No.
Manufacturer: Norco

Forklift Jack 5 Ton (Late Version)


Product image of Norco 72036C (Late Version) on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
6.) 72036C (Early Version) - Item No.
Manufacturer: Norco

Forklift Jack 5 Ton (Early Version)


Product image of Norco 72036C (Early Version) on HCRCnow.com.
Price: Discontinued This product has been discontinued.
Page 1 of 1 (Showing results 1 - 6 of 6)

« Back to Tools and Equipment Categories