Tools and Equipment - Floor Jacks

PRODUCT DETAILS

The Norco 71233B is a 2-ton double-pump floor jack designed as an economical jack for general automotive shop work. Its very low starting height reaches under low-clearance vehicles.

FEATURES

• Very low starting height for low-clearance vehicles.
• Safety bypass and overload systems protect the cylinder and keep the jack within the ASME/PASE load-limiting standard.
• Heavy-duty chassis.
• Two-piece handle for easier shipping and storage.
• U-joint release mechanism for more precise lowering control.
• Foam handle sleeve included to protect vehicles.
• Dual pump piston reaches maximum height in 8-1/2 strokes.
• Optional 3 in. saddle extension adapter (model 71303, sold separately).

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

Five-ton FASTJACK floor jack for truck fleets, truck and farm equipment dealers, and bus company garages.

FEATURES

• FASTJACK mechanism raises the saddle to the load with one pump of the T-handle.
• Locking release lever secures the handle in the vertical, 45-degree, or horizontal position for controlled lowering.
• Chromed ram and dust seals prevent hydraulic contamination.
• Safety bypass and overload systems protect the hydraulic block and prevent use beyond the load-limiting standard.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

Five-ton air/hydraulic FASTJACK floor jack for truck fleets, truck and farm equipment dealers, and bus company garages. The air pump model can also be operated manually.

FEATURES

• FASTJACK mechanism raises the saddle to the load with one pump of the T-handle.
• Locking release lever secures the handle in the vertical, 45-degree, or horizontal position for controlled lowering.
• Chromed ram and dust seals prevent hydraulic contamination.
• Safety bypass and overload systems protect the hydraulic block and prevent use beyond the load-limiting standard.
• Air pump can also be operated manually.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72030B is a floor-type hydraulic clutch jack with a 300 lb. capacity. It includes two spline shafts and uses two-stage chromed rams.

FEATURES

• Two-stage flash-chromed rams inhibit rust from entering the hydraulic system.
• Polyurethane wheels help protect tile and epoxy floors.
• Includes 2 spline shafts.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72090A is a 20-ton air/hydraulic floor jack with a low profile for vehicles with limited ground clearance. Its light weight makes it well suited to mobile repair service on heavy trucks, farm equipment and construction equipment.

FEATURES

• Low lowered height for reaching under low-clearance vehicles.
• Lightweight design is well suited to mobile repair service.
• Self-retracting ram eliminates manual lowering of the jack.
• Fast air pump reduces lifting time and has a built-in relief mechanism.
• Removable extension screw is used with the two 4 in. extension adapters that are included.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The Norco 72230A is a 20-ton air/hydraulic floor jack built for heavy-duty truck, heavy construction and agricultural equipment maintenance garages. A safety bypass and overload system protects the hydraulic block.

FEATURES

• Chrome-plated ram and dust seals help keep contaminants out of the hydraulic system.
• Safety bypass and overload systems protect the cylinder and keep the jack within the ASME/PASE load-limiting standard.
• Air pump models can also be operated manually.
• Locking release lever holds the handle in the vertical, 45-degree or horizontal position to lower the load.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

One-and-a-half-ton scissors jack for passenger car tire changing.

FEATURES

• Combination right- and left-hand threaded drive screw raises the jack faster.
• Two-piece, extra-long 22.5-inch crank handle eases operation under load, extends reach, and stores conveniently.

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic DK120Q is a 12 ton garage jack built in Denmark for trucks, agricultural machinery and contractors' machines. It lifts from 5.91 in. to 23.03 in. on a wide, robust steel frame.

FEATURES

• Low minimum height of 5.91 in. for heavy vehicles and machinery
• Wide, sturdy high-strength steel frame for stable lifting
• Hard chrome-plated cylinder for long service life and minimal maintenance
• Quick-lift pedal reaches the lifting point fast
• Precise, controlled lowering
• Manual dead man's release for safer lowering
• Built-in safety overload valve
• Optional pneumatic tires for easier maneuvering
• Ergonomic handle for a firm, secure grip

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic DK13HLQ is a 1.3 ton high lift garage jack built in Denmark for low profile cars. The long reach and 3.15 in. entry height help it reach lifting points on cars with low clearance, and it lifts to 28.94 in.

FEATURES

• Long-reach high lifter for low-clearance cars
• Very low minimum height of 3.15 in.
• Wide, sturdy high-strength steel frame for stable lifting
• Hard chrome-plated cylinder for long service life and minimal maintenance
• Quick-lift pedal reaches the lifting point fast
• Precise, controlled lowering
• Manual dead man's release for safer lowering
• Built-in safety overload valve
• Quiet wheels with polyurethane O-ring surfaces protect the floor
• Ergonomic handle for a firm, secure grip

SPECS

PRODUCT DIMENSIONS

PRODUCT DETAILS

The AC Hydraulic DK50HLQ is a 5 ton high lift hydraulic garage jack built in Denmark for trucks, agricultural machinery and contractors' machines. It lifts from 5.51 in. to 38.39 in. on a wide, robust steel frame.

FEATURES

• Low minimum height of 5.51 in. with a high maximum lift for trucks and heavy machinery
• Wide, sturdy high-strength steel frame for stable lifting
• Hard chrome-plated cylinder for long service life and minimal maintenance
• Quick-lift pedal reaches the lifting point fast
• Precise, controlled lowering
• Manual dead man's release for safer lowering
• Built-in safety overload valve
• Optional pneumatic tires for easier maneuvering
• Ergonomic handle for a firm, secure grip

SPECS

PRODUCT DIMENSIONS