Tools and Equipment - Cylinder / Rams

or browse the results below.

Page 1 of 4 (Showing results 1 - 50 of 176)
1.) PR-7 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $900.00
2.) PR-9 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
3.) XL-9 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch


OEM Number: 5502100

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
4.) 10312 - Item No.
Manufacturer: ESCO

Aluminum Hydraulic Cylinder 55 Ton


Technical Specifications

  • Lifting Capacity: 55 tons
  • Stroke: 6 in. | 152 mm
  • Max Pressure: 10,000 psi
  • Min. Height: 12 in. | 308 mm
  • Max. Height: 18 in. | 460 mm
  • Saddle Diameter: 3 in. | 79 mm
  • Cylinder Width: 5.25 in. | 133 mm
  • Cylinder Wall: 11/16 in. | 17 mm
  • Base Plate: 8 x 8 in. | 203 x 203 mm
  • Weight: 33 lbs. | 15 kg



Product image of ESCO 10312 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $932.14
5.) 44135 - Item No.
Manufacturer: OTC

CYLINDER 10 TON

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $923.79
6.) 44135 - Item No.
Manufacturer: SPX (Power Team)

CYL, 10 TON 10-1/8" STROKE

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $748.92
7.) 51678 - Item No.
Manufacturer: OTC

CYLINDER ASSY


  • Free Shipping applies within the contiguous 48 states (excludes Hawaii and Alaska). Additional fees may apply for residential deliveries or for liftgate services at commercial addresses


This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $6,999.98
8.) 52434 - Item No.
Manufacturer: SPX (Power Team)

CYL, 100 TON 10-1/4" STROKE, OR9

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $5,081.32
9.) PR-7X - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
10.) PR-9C - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
11.) PR-9X - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
12.) RC151 - Item No.
Manufacturer: Enerpac

Hydraulic Cylinder 15.7 Ton Capacity


Product image of Enerpac RC151 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $840.23
13.) RJ-12 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder (New Style)


  • Cylinder Dimensions - 2-1/2in X 4-3/8in
  • NOTE: Seal Kit is not available for Original Style Cylinder
  • NOTE: Replaced by New Cylinder, Pictured Below


OEM Number: RJ-CYL1, RJ-CYL2

Product image of BendPak RJ-12 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $482.00
14.) RJ-12 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder


  • Cylinder Dimensions - 2-1/2in X 4-3/8in
  • NOTE: WIDE BASE
  • NOTE: This Hydraulic Cylinder has a WIDE BASE, and its Fitting LOCATED ON TOP



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $338.30
15.) RJ-15 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder


  • Cylinder Dimensions - 2-1/2in X 4-3/8in
  • NOTE: WIDE BASE
  • NOTE: This Hydraulic Cylinder has a WIDE BASE, and its Fitting LOCATED ON TOP



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $338.30
16.) RJ-15 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder (New Style)


  • NOTE: Seal Kit is not available for your Original Style Cylinder

  • NOTE: Replaced by New Cylinder, Pictured Below


OEM Number: RJ-CYL1, RJ-CYL2

Product image of BendPak RJ-15 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $482.00
17.) RJ-18 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder


NOTE: Seal Kit is not available for This Cylinder




Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $378.00
18.) XL-9C - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
19.) XL-9X - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch


OEM Number: 5502100

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
20.) XPR-9 - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder 2.5 x 37 (1.75 ROD)


Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $900.00
21.) 301122 - Item No.
Manufacturer: Dake

Cylinder 10 Ton

 Price: $246.96
22.) 700541 - Item No.
Manufacturer: BendPak

CYLINDER ASSEMBLY Ø4.0 x 18.5

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $785.00
23.) 910010 - Item No.
Manufacturer: Norco

10 Ton Ram, 10'' Stroke, Double Acting


Product image of Norco 910010 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
24.) 910029 - Item No.
Manufacturer: Norco

Cylinder 10 Ton


Product image of Norco 910029 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
25.) 910030 - Item No.
Manufacturer: Norco

NORCO 910030 10 TON RAM, 12" STROKE


PRODUCT DETAILS

The Norco 910030 is a 10-ton single-acting ram with a long 12 in. stroke for work that needs extended reach in shop, agricultural, truck service and construction maintenance applications.

FEATURES

  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Heavy-duty return springs provide consistent retraction.
  • Baked enamel exterior finish resists corrosion.
  • Polyurethane seals and wipers provide a long cycle life.
  • Includes a high-flow quick-connect coupler and dust cap.
  • Meets ANSI B30.1 standards.

SPECS

Capacity10 tons
TypeSingle-acting with return spring
Stroke12 in.
Cylinder bore1.69 in.
Oil capacity26.76 cu. in.
Shipping weight16.5 lb

PRODUCT DIMENSIONS

Collapsed height15.75 in.
Extended height27.75 in.



Product image of Norco 910030 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $584.98
26.) 910045 - Item No.
Manufacturer: Norco

NORCO 910045 10 TON RAM, 10-1/8" STROKE, FLAT BASE


PRODUCT DETAILS

The Norco 910045 is a 10-ton ram with a flat base and a 10-1/8 in. stroke, used for lifting, pushing, pulling, bending and holding in shop, agricultural, truck service and construction maintenance work.

FEATURES

  • Flat base.
  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Heavy-duty return springs provide consistent retraction.
  • Baked enamel exterior finish resists corrosion.
  • Polyurethane seals and wipers provide a long cycle life.
  • Includes a high-flow quick-connect coupler and dust cap.
  • Meets ANSI B30.1 standards.

SPECS

Capacity10 tons
ReturnReturn spring
Stroke10.13 in.
Cylinder bore1.69 in.
Oil capacity22.59 cu. in.
Shipping weight14 lb

PRODUCT DIMENSIONS

Collapsed height13.5 in.
Extended height23.63 in.



Product image of Norco 910045 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued Request Quote
27.) 910047 - Item No.
Manufacturer: Norco

10 Ton Capacity Cylinder


14" Stroke

NOTE: Models not shown have same
basic construction as model pictured.

INTENDED USE:

For many applications including shop, agricultural, automotive / truck service needs and construction maintenance applications where lifting, pushing, pulling, bending or holding may be required.

FEATURES:
  • High flow quick connecting coupler and dust cap included on all models.
  • Unique piston and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extending and jamming.
  • Nickel plating on most cylinder pistons inhibits rusting.
  • Baked enamel exterior finish for increased corrosion resistance.
  • Polyurethane seals and wipers provide high cycle life.
  • Heavy duty return springs provide consistent performance.
  • Cylinders comply with ANSI B 30.1.
DIMENSIONS:
Stroke 14"
Minimum Height 17.75"
Maximum Height 31.75"
Oil Capacity (Cu. In.) 31.22
Shipping Weight 18 lbs.
   

 




Product image of Norco 910047 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $697.43
28.) 915006 - Item No.
Manufacturer: Norco

NORCO 915006 15 TON RAM, 6" STROKE


PRODUCT DETAILS

The Norco 915006 is a 15-ton single-acting ram with a 6 in. stroke, used for lifting, pushing, pulling, bending and holding in shop, agricultural, truck service and construction maintenance work.

FEATURES

  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Heavy-duty return springs provide consistent retraction.
  • Baked enamel exterior finish resists corrosion.
  • Polyurethane seals and wipers provide a long cycle life.
  • Includes a high-flow quick-connect coupler and dust cap.
  • Meets ANSI B30.1 standards.

SPECS

Capacity15 tons
TypeSingle-acting with return spring
Stroke6 in.
Cylinder bore2 in.
Oil capacity18.84 cu. in.
Shipping weight15 lb

PRODUCT DIMENSIONS

Collapsed height10.69 in.
Extended height16.69 in.



Product image of Norco 915006 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $484.98
29.) 925023 - Item No.
Manufacturer: Norco

NORCO 925023 25 TON CAPACITY CYLINDER, 4" STROKE


PRODUCT DETAILS

The Norco 925023 is a 25-ton hydraulic cylinder with a 4 in. stroke and a low collapsed height, used for lifting, pushing, pulling, bending and holding in shop, agricultural, truck service and construction maintenance work.

FEATURES

  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Heavy-duty return springs provide consistent retraction.
  • Baked enamel exterior finish resists corrosion.
  • Polyurethane seals and wipers provide a long cycle life.
  • Includes a high-flow quick-connect coupler and dust cap.
  • Meets ANSI B30.1 standards.

SPECS

Capacity25 tons
ReturnReturn spring
Stroke4 in.
Cylinder bore2.56 in.
Oil capacity20.6 cu. in.
Shipping weight18 lb

PRODUCT DIMENSIONS

Collapsed height8.5 in.
Extended height12.5 in.



Product image of Norco 925023 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $835.98
30.) 925024 - Item No.
Manufacturer: Norco

NORCO 925024 25-TON HYDRAULIC CYLINDER WITH 10-1/4-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity25 tons
ActionSingle-acting
Stroke10.25 in.
Oil capacity52.79 cu. in.
Shipping weight31 lb

PRODUCT DIMENSIONS

Minimum height14.75 in.
Maximum height25 in.



Product image of Norco 925024 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,055.82
31.) 930003 - Item No.
Manufacturer: Norco

NORCO 930003 30-TON HYDRAULIC CYLINDER WITH 2-7/16-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity30 tons
ActionSingle-acting
Stroke2.44 in.
Oil capacity15.85 cu. in.
Shipping weight15 lb

PRODUCT DIMENSIONS

Minimum height4.63 in.
Maximum height7.06 in.



Product image of Norco 930003 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $681.86
32.) 930008 - Item No.
Manufacturer: Norco

NORCO 930008 30-TON DOUBLE-ACTING HYDRAULIC CYLINDER WITH 8-1/4-INCH STROKE


PRODUCT DETAILS

Double-acting hydraulic cylinder for applications requiring controlled pushing and pulling force.

SPECS

Push capacity30 tons
Pull capacity5 tons
ActionDouble-acting
Stroke8.25 in.
Push oil capacity53.67 cu. in.
Pull oil capacity25 cu. in.
Cylinder bore diameter2.88 in.
Effective area, push6.51 sq. in.
Effective area, pull3 sq. in.
Shipping weight40 lb

PRODUCT DIMENSIONS

Minimum height15.25 in.
Maximum height23.5 in.
Piston outside diameter2.13 in.
Cylinder outside diameter4 in.
Saddle diameter2 in.
Collar thread size3.31 x 12



Product image of Norco 930008 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,247.86
33.) 950005 - Item No.
Manufacturer: Norco

NORCO 950005 50-TON HYDRAULIC CYLINDER WITH 2-3/8-INCH STROKE


PRODUCT DETAILS

Hydraulic cylinder for shop, agricultural, automotive and truck service, construction, and maintenance applications requiring lifting, pushing, pulling, bending, or holding.

FEATURES

  • High-flow quick-connect coupler and dust cap included.
  • Piston and cylinder bearings help absorb eccentric-load stresses and protect against abrasion, overextension, and jamming.
  • Nickel-plated piston helps inhibit rust.
  • Baked-enamel exterior finish increases corrosion resistance.
  • Polyurethane seals and wipers support high-cycle service life.
  • Complies with ANSI B30.1.
  • Heavy-duty return spring provides consistent performance.

SPECS

Capacity50 tons
ActionSingle-acting
Stroke2.38 in.
Oil capacity22.91 cu. in.
Shipping weight24 lb

PRODUCT DIMENSIONS

Minimum height4.81 in.
Maximum height7.19 in.



Product image of Norco 950005 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $914.71
34.) 950006 - Item No.
Manufacturer: Norco

Aluminum Cylinder 50 Ton


Product image of Norco 950006 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
35.) 955055 - Item No.
Manufacturer: Norco

Aluminum Cylinder 55 Ton


Product image of Norco 955055 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
36.) 955060 - Item No.
Manufacturer: Norco

Cylinder 50 Ton


Product image of Norco 955060 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
37.) 955065 - Item No.
Manufacturer: Norco

NORCO 955065 50 TON RAM, 13 1/4" STROKE


PRODUCT DETAILS

The Norco 955065 is a single-acting hydraulic cylinder (ram) with a 13.37 in. stroke, made for lifting heavy off-road and construction equipment. Norco rates this model at 55 tons.

FEATURES

  • Plunger wiper seal keeps out contamination and debris.
  • Upper and lower bronze bearings reduce rod wear and extend service life.
  • Industrial-grade return springs for longer spring life.
  • Industrial-grade steel construction.
  • Chrome-plated piston rod resists corrosion and rust.
  • 3/8 in. NPTF female coupler and dust cap.

SPECS

Capacity55 tons
TypeSingle-acting with return spring
Stroke13.37 in.
Oil capacity147.7 cu. in.
Shipping weight85 lb

PRODUCT DIMENSIONS

Minimum height18.07 in.
Maximum height31.44 in.



Product image of Norco 955065 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $1,421.56
38.) 955106 - Item No.
Manufacturer: Norco

NORCO 955106 50 TON RAM, 6-1/8" STROKE, DOUBLE ACTING


PRODUCT DETAILS

The Norco 955106 is a double-acting hydraulic cylinder (ram) that pushes and pulls under power. It has a 6-1/8 in. stroke, 50-ton pushing capacity and 10-ton pulling capacity.

FEATURES

  • Double-acting: pushes and pulls under power.
  • Use only with Norco's 4-way valve hand pump, model 925014.
  • Built-in safety valve prevents over-pressurization.
  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Baked enamel exterior finish resists corrosion; polyurethane seals and wipers provide a long cycle life.
  • Includes a high-flow quick-connect coupler and dust cap.

SPECS

Capacity (push)50 tons
Capacity (pull)10 tons
TypeDouble-acting
Stroke6.125 in.
Oil capacity67.77 cu. in.
Shipping weight67 lb

PRODUCT DIMENSIONS

Collapsed height13-1/16 in.
Extended height19-3/16 in.



Product image of Norco 955106 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $2,531.00
39.) 999000 - Item No.
Manufacturer: Norco

NORCO 999000 100 TON RAM, 10-1/4" STROKE


PRODUCT DETAILS

The Norco 999000 is a 100-ton single-acting hydraulic cylinder (ram) with a 10.25 in. stroke for the heaviest lifting and pressing jobs in shop, industrial and construction maintenance work.

FEATURES

  • Single-acting with return spring for retraction.
  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Baked enamel exterior finish resists corrosion.
  • Includes a quick-connect coupler and dust cap.

SPECS

Capacity100 tons
TypeSingle-acting with return spring
Stroke10.25 in.
Cylinder bore5.13 in.
Oil capacity211.66 cu. in.
Shipping weight160 lb

PRODUCT DIMENSIONS

Collapsed height17.69 in.
Extended height27.94 in.



Product image of Norco 999000 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $3,840.00
40.) 999100 - Item No.
Manufacturer: Norco

Cylinder 100 Ton


Product image of Norco 999100 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
41.) 999106 - Item No.
Manufacturer: Norco

NORCO 999106 100 TON RAM, 6-5/8" STROKE, DOUBLE ACTING


PRODUCT DETAILS

The Norco 999106 is a 100-ton double-acting ram with a 6-5/8 in. stroke. Double-acting design lets it pull as well as push under power.

FEATURES

  • Double-acting: pushes and pulls under power.
  • Use only with Norco's 4-way valve hand pump, model 925014.
  • Built-in safety valve prevents over-pressurization.
  • Piston and cylinder bearings absorb off-center load stress to help prevent abrasion, over-extension and jamming.
  • Baked enamel exterior finish resists corrosion; polyurethane seals and wipers provide a long cycle life.

SPECS

Capacity100 tons
TypeDouble-acting
Stroke6.625 in.
Cylinder bore5.13 in.
Oil capacity63 cu. in.
Shipping weight135 lb

PRODUCT DIMENSIONS

Collapsed height14.06 in.
Extended height20.69 in.



Product image of Norco 999106 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued Request Quote
42.) H10006 - Item No.
Manufacturer: Hein-Werner

100 TON 6 Inch STROKE S/A HYD CYLINDER


Product image of Hein-Werner H10006 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $3,282.25
43.) PL-6SP - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
44.) PR-12F - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
45.) PR-15C - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
46.) PR-7AC - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
47.) PR-7CX - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
48.) PR-9AC - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
49.) PR-9CX - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
50.) PR-9CX - Item No.
Manufacturer: BendPak

Complete Hydraulic Cylinder Ø2.5 x 37 (Ø1.75 ROD)


  • End of Rod is Machined to 01.50 Inch



Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $775.00
Page 1 of 4 (Showing results 1 - 50 of 176)

« Back to Tools and Equipment Categories