Tools and Equipment - Axle / Truck Jacks

or browse the results below.

Page 1 of 1 (Showing results 1 - 35 of 35)
1.) 25-1 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 25-1 25 TON SINGLE-STAGE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 25-1 is a single-stage air hydraulic jack with a 25 ton capacity for heavy plant machinery and trucks. It lifts from 8.66 in. to 13.58 in. and runs on shop compressed air.

FEATURES

  • Single-stage design for heavy plant machinery and trucks
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity55,000 lb (25 ton)
Minimum height8.66 in.
Maximum height13.58 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight137 lb

PRODUCT DIMENSIONS

Frame length30.31 in.
Width6.30 in.
Width with wheels12.01 in.



Product image of AC Hydraulic 25-1 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $2,350.98
2.) 25-2 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 25-2 25 TON / 10 TON TWO-STAGE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 25-2 is a two-stage air hydraulic jack for buses and trucks, with a 25 ton first stage and a 10 ton second stage. It starts at 7.09 in. and reaches 14.96 in. on the second stage.

FEATURES

  • Two-stage design for buses and trucks
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity55,000 lb (25 ton) / 22,000 lb (10 ton)
Minimum height7.09 in.
Maximum height10.83 in. / 14.96 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight132 lb

PRODUCT DIMENSIONS

Frame length30.31 in.
Width6.30 in.
Width with wheels12.01 in.



Product image of AC Hydraulic 25-2 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $2,300.98
3.) 50-2 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 50-2 50 TON / 25 TON TWO-STAGE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 50-2 is a two-stage air hydraulic jack for heavy buses and trucks, with a 50 ton first stage and a 25 ton second stage. It starts at 8.66 in. and reaches 17.72 in. on the second stage.

FEATURES

  • Two-stage design for heavy buses and trucks
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity110,000 lb (50 ton) / 55,000 lb (25 ton)
Minimum height8.66 in.
Maximum height13.39 in. / 17.72 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight176 lb

PRODUCT DIMENSIONS

Frame length31.89 in.
Width7.87 in.
Width with wheels12.40 in.



Product image of AC Hydraulic 50-2 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $2,875.98
4.) 50-3 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 50-3 50 TON / 25 TON / 10 TON THREE-STAGE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 50-3 is a three-stage air hydraulic jack for low buses and other low-clearance vehicles, with 50, 25 and 10 ton stages. It starts at only 5.91 in. and reaches 13.19 in. on the third stage.

FEATURES

  • Three-stage design for low buses and other low-clearance vehicles
  • Low minimum height of 5.91 in.
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity110,000 lb (50 ton) / 55,000 lb (25 ton) / 22,000 lb (10 ton)
Minimum height5.91 in.
Maximum height8.27 in. / 10.43 in. / 13.19 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight148 lb

PRODUCT DIMENSIONS

Frame length31.89 in.
Width7.87 in.
Width with wheels12.20 in.



Product image of AC Hydraulic 50-3 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $3,350.98
5.) 65-1 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 65-1 65 TON AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 65-1 is a single-stage air hydraulic jack with a 65 ton capacity for heavy contractors' machinery. It lifts from 9.65 in. to 14.96 in. and runs on shop compressed air.

FEATURES

  • Single-stage, 65 ton design for heavy contractors' machinery
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity143,000 lb (65 ton)
Minimum height9.65 in.
Maximum height14.96 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight209 lb

PRODUCT DIMENSIONS

Frame length32.48 in.
Width7.87 in.
Width with wheels14.96 in.



Product image of AC Hydraulic 65-1 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $3,369.98
6.) P103 - Item No.
Manufacturer: Norco

Pasquin Jack


Product image of Norco P103 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
7.) P301 - Item No.
Manufacturer: Norco

Pasquin P301 Axle Jack 30 ton


Product image of Norco P301 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: N/A Request Quote
8.) P302 - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 55/33 Ton


Product image of Norco P302 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
9.) P306 - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 53/44/35/26.4/17.6/11 Ton


Product image of Norco P306 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
10.) 100-1 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 100-1 100 TON HEAVY DUTY AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 100-1 is a 100 ton heavy duty air hydraulic jack built in Denmark for heavy mining and construction machinery. It lifts from 27.56 in. to 43.31 in. and runs on shop compressed air.

FEATURES

  • Working range of 27.56 in. to 43.31 in.
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity220,000 lb (100 ton)
Minimum height27.56 in.
Maximum height43.31 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight1,050 lb

PRODUCT DIMENSIONS

Frame length68.50 in.
Width22.44 in.
Width with wheels26.97 in.
Handle length51.18 in.
Ground clearance2.56 in.



Product image of AC Hydraulic 100-1 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $13,514.20
11.) 150-1 - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 150-1 150 TON HEAVY DUTY AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 150-1 is a 150 ton heavy duty air hydraulic jack built in Denmark for heavy mining and construction machinery. It lifts from 27.56 in. to 43.31 in. and runs on shop compressed air.

FEATURES

  • Working range of 27.56 in. to 43.31 in.
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity330,000 lb (150 ton)
Minimum height27.56 in.
Maximum height43.31 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight1,050 lb

PRODUCT DIMENSIONS

Frame length68.50 in.
Width22.44 in.
Width with wheels26.97 in.
Handle length51.18 in.
Ground clearance2.56 in.



Product image of AC Hydraulic 150-1 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $15,015.78
12.) 25-1H - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 25-1H 25 TON SINGLE-STAGE HIGH-CLEARANCE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 25-1H is a single-stage air hydraulic jack with a 25 ton capacity for agricultural and contractors' machinery, trailers and other high-clearance applications. It lifts from 14.17 in. to 24.02 in. and runs on shop compressed air.

FEATURES

  • Single-stage design for agricultural and contractors' machinery, trailers and high-clearance uses
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity55,000 lb (25 ton)
Minimum height14.17 in.
Maximum height24.02 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight157 lb

PRODUCT DIMENSIONS

Frame length32.28 in.
Width9.06 in.
Width with wheels12.20 in.



Product image of AC Hydraulic 25-1H on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $2,899.98
13.) 50-3H - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 50-3H 50 TON / 25 TON / 10 TON THREE-STAGE HIGH-CLEARANCE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 50-3H is a three-stage air hydraulic jack for high-clearance vehicles, with 50, 25 and 10 ton stages. It starts at 8.66 in. and reaches 22.05 in. on the third stage.

FEATURES

  • Three-stage design for high-clearance vehicles
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity110,000 lb (50 ton) / 55,000 lb (25 ton) / 22,000 lb (10 ton)
Minimum height8.66 in.
Maximum height13.39 in. / 17.72 in. / 22.05 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight170 lb

PRODUCT DIMENSIONS

Frame length31.89 in.
Width7.87 in.
Width with wheels12.20 in.



Product image of AC Hydraulic 50-3H on HCRCnow.com.
Price: $3,656.98
14.) 65-1H - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 65-1H 65 TON HIGH-CLEARANCE AIR HYDRAULIC JACK


PRODUCT DETAILS

The AC Hydraulic 65-1H is a single-stage air hydraulic jack with a 65 ton capacity for heavy-duty, high-clearance applications. It lifts from 16.73 in. to 28.54 in. and runs on shop compressed air.

FEATURES

  • Single-stage, 65 ton design for heavy-duty, high-clearance applications
  • Hard chrome-plated piston rod for long service life
  • Built-in safety overload valve
  • Hand-operated dead man's control for safer lifting and lowering
  • Air-powered pump for fast lifting with little effort
  • Built for heavy-duty, intensive commercial use

SPECS

Capacity143,000 lb (65 ton)
Minimum height16.73 in.
Maximum height28.54 in.
Air supply130 to 174 psi
Air consumption12.4 cfm
Shipping weight304 lb

PRODUCT DIMENSIONS

Frame length38.58 in.
Width11.81 in.
Width with wheels14.96 in.



Product image of AC Hydraulic 65-1H on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $4,845.98
15.) 72212 - Item No.
Manufacturer: Norco

NORCO 72212 55 / 37 / 23 / 12 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK


PRODUCT DETAILS

The Norco 72212 is a four-stage telescopic air/hydraulic floor jack rated 55 tons in the first stage, with 37, 23 and 12 ton ratings in the later stages. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

  • Long T-handle helps position the jack under vehicles with low overhang.
  • Handle lock holds the handle vertical, at 45 degrees or horizontal.
  • Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
  • Rust-inhibitive coating on the rams.
  • Integrated filter protects the air motor.
  • Double-acting pump raises the ram faster.
  • Suspension-loaded axle helps prevent wheel damage.
  • Vacuum-operated ram retraction means no manual lowering.
  • Emergency stop button at the top of the handle halts operation immediately.
  • Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage55 / 37 / 23 / 12 tons
TypeTelescopic air/hydraulic floor jack
Piston stroke9.5 in.
Operating pressure range100-175 psi
Shipping weight233 lb

PRODUCT DIMENSIONS

Low lift height6 in.
High lift height15.375 in.
Length39.25 in.
Width8.625 in.
Handle length61.75 in.



Product image of Norco 72212 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $4,993.99
16.) 72218 - Item No.
Manufacturer: Norco

NORCO 72218 33 / 20 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK


PRODUCT DETAILS

The Norco 72218 is a two-stage telescopic air/hydraulic floor jack rated 33 tons and 20 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

  • 50 in. T-handle helps position the jack under vehicles with low overhang.
  • Handle lock holds the handle vertical, at 45 degrees or horizontal.
  • Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
  • Rust-inhibitive coating on the rams.
  • Integrated filter protects the air motor.
  • Double-acting pump raises the ram faster.
  • Suspension-loaded axle helps prevent wheel damage.
  • Vacuum-operated ram retraction means no manual lowering.
  • Emergency stop button at the top of the handle halts operation immediately.
  • Includes 2 in. and 3-15/16 in. stackable extensions with an extension holder.

SPECS

Capacity by stage33 / 20 tons
TypeTelescopic air/hydraulic floor jack
Piston stroke6.125 in.
Operating pressure range120-175 psi
Shipping weight100 lb

PRODUCT DIMENSIONS

Low lift height6 in.
High lift height12 in.
Length16 in.
Width6.75 in.
Handle length49.25 in.



Product image of Norco 72218 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $2,939.99
17.) 72225 - Item No.
Manufacturer: Norco

NORCO 72225 50 / 25 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK


PRODUCT DETAILS

The Norco 72225 is a two-stage telescopic air/hydraulic floor jack rated 50 tons and 25 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

  • Long T-handle helps position the jack under vehicles with low overhang.
  • Handle lock holds the handle vertical, at 45 degrees or horizontal.
  • Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
  • Rust-inhibitive coating on the rams.
  • Integrated filter protects the air motor.
  • Double-acting pump raises the ram faster.
  • Suspension-loaded axle helps prevent wheel damage.
  • Vacuum-operated ram retraction means no manual lowering.
  • Emergency stop button at the top of the handle halts operation immediately.
  • Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage50 / 25 tons
TypeTelescopic air/hydraulic floor jack
Piston stroke7.875 in.
Operating pressure range120-175 psi
Shipping weight235 lb

PRODUCT DIMENSIONS

Low lift height8.75 in.
High lift height16.5 in.
Length39.25 in.
Width8.625 in.
Handle length61.75 in.



Product image of Norco 72225 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $3,949.00
18.) 72244 - Item No.
Manufacturer: Norco

NORCO 72244 44 TON CAPACITY AIR OPERATED HYDRAULIC FLOOR JACK


PRODUCT DETAILS

The Norco 72244 is a 44-ton air-operated hydraulic floor jack. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

  • Long T-handle helps position the jack under vehicles with low overhang.
  • Handle lock holds the handle vertical, at 45 degrees or horizontal.
  • Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
  • Rust-inhibitive coating on the rams.
  • Integrated filter protects the air motor.
  • Double-acting pump raises the ram faster.
  • Suspension-loaded axle helps prevent wheel damage.
  • Vacuum-operated ram retraction means no manual lowering.
  • Emergency stop button at the top of the handle halts operation immediately.
  • Includes a 2-3/4 in. diameter saddle, 2 in. and 4 in. stackable extensions, and an extension holder.

SPECS

Capacity44 tons
TypeAir-operated hydraulic floor jack
Piston stroke5.5 in.
Operating pressure range130-175 psi
Shipping weight149 lb

PRODUCT DIMENSIONS

Low lift height9.25 in.
High lift height15.625 in.
Length21.625 in.
Width8.125 in.
Handle length61.75 in.



Product image of Norco 72244 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $3,040.00
19.) 72255 - Item No.
Manufacturer: Norco

NORCO 72255 88 / 55 TON CAPACITY AIR / HYDRAULIC TELESCOPIC FLOOR JACK


PRODUCT DETAILS

The Norco 72255 is a two-stage telescopic air/hydraulic floor jack rated 88 tons and 55 tons by stage. It is intended for heavy-duty truck, rail, bus, agricultural and construction equipment.

FEATURES

  • Long T-handle helps position the jack under vehicles with low overhang.
  • Handle lock holds the handle vertical, at 45 degrees or horizontal.
  • Overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.
  • Rust-inhibitive coating on the rams.
  • Integrated filter protects the air motor.
  • Double-acting pump raises the ram faster.
  • Suspension-loaded axle helps prevent wheel damage.
  • Vacuum-operated ram retraction means no manual lowering.
  • Emergency stop button at the top of the handle halts operation immediately.
  • Includes a removable 2-3/4 in. saddle, 2-9/16 in. and 5-7/8 in. extensions, and an extension holder.

SPECS

Capacity by stage88 / 55 tons
TypeTelescopic air/hydraulic floor jack
Piston stroke7.5 in.
Operating pressure range150-175 psi
Shipping weight235 lb

PRODUCT DIMENSIONS

Low lift height8.6 in.
High lift height16.2 in.
Length38.1 in.
Width11.4 in.
Handle length61.75 in.



Product image of Norco 72255 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $4,929.99
20.) P152C - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 30/15 Ton


Product image of Norco P152C on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
21.) P303N - Item No.
Manufacturer: Norco

P303N Air/Hydraulic Axle Jack 60/40/20 ton


Product image of Norco P303N on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: N/A Request Quote
22.) P304S - Item No.
Manufacturer: Norco

P304S Air/Hydraulic Axel Jack 58/45/25/13 ton


Product image of Norco P304S on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: N/A Request Quote
23.) 100-1H - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 100-1H 100 TON HEAVY DUTY AIR HYDRAULIC JACK FOR HIGH-CLEARANCE MACHINERY


PRODUCT DETAILS

The AC Hydraulic 100-1H is a 100 ton heavy duty air hydraulic jack built in Denmark for high-clearance mining and construction machinery. It lifts from 37.40 in. to 62.99 in. and runs on shop compressed air.

FEATURES

  • Tall working range of 37.40 in. to 62.99 in. for high-clearance machinery
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity220,000 lb (100 ton)
Minimum height37.40 in.
Maximum height62.99 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight1,204 lb

PRODUCT DIMENSIONS

Frame length68.50 in.
Width22.44 in.
Width with wheels26.97 in.
Handle length51.18 in.
Ground clearance2.56 in.



Product image of AC Hydraulic 100-1H on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $12,105.98
24.) 100-1L - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 100-1L 100 TON HEAVY DUTY AIR HYDRAULIC JACK FOR LOW-CLEARANCE MACHINERY


PRODUCT DETAILS

The AC Hydraulic 100-1L is a 100 ton heavy duty air hydraulic jack built in Denmark for low-clearance mining and construction machinery. It lifts from 17.13 in. to 22.44 in. and runs on shop compressed air.

FEATURES

  • Low minimum height of 17.13 in. for low-clearance machinery
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity220,000 lb (100 ton)
Minimum height17.13 in.
Maximum height22.44 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight732 lb

PRODUCT DIMENSIONS

Frame length61.02 in.
Width13.78 in.
Width with wheels18.31 in.
Handle length51.18 in.
Ground clearance1.57 in.



Product image of AC Hydraulic 100-1L on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $11,261.84
25.) 150-1H - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 150-1H 150 TON HEAVY DUTY AIR HYDRAULIC JACK FOR HIGH-CLEARANCE MACHINERY


PRODUCT DETAILS

The AC Hydraulic 150-1H is a 150 ton heavy duty air hydraulic jack built in Denmark for high-clearance mining and construction machinery. It lifts from 37.40 in. to 62.99 in. and runs on shop compressed air.

FEATURES

  • Tall working range of 37.40 in. to 62.99 in. for high-clearance machinery
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity330,000 lb (150 ton)
Minimum height37.40 in.
Maximum height62.99 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight1,204 lb

PRODUCT DIMENSIONS

Frame length68.50 in.
Width22.44 in.
Width with wheels26.97 in.
Handle length51.18 in.
Ground clearance2.56 in.



Product image of AC Hydraulic 150-1H on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $17,268.15
26.) 150-1L - Item No.
Manufacturer: AC Hydraulic

AC HYDRAULIC 150-1L 150 TON HEAVY DUTY AIR HYDRAULIC JACK FOR LOW-CLEARANCE MACHINERY


PRODUCT DETAILS

The AC Hydraulic 150-1L is a 150 ton heavy duty air hydraulic jack built in Denmark for low-clearance mining and construction machinery. It lifts from 17.13 in. to 22.44 in. and runs on shop compressed air.

FEATURES

  • Low minimum height of 17.13 in. for low-clearance machinery
  • All-steel, heavy-duty chassis built for harsh working conditions
  • Large rubber tires for positioning on rough surfaces
  • Chassis design allows on-site jack repair and wheel changes
  • Multi-position handle that tilts back for transport
  • Safety valve protects against overload, load loss and loss of hydraulic fluid
  • Dead man's control handle for safer lifting and lowering
  • Two lifting eyes for handling with a crane or hoist

SPECS

Capacity330,000 lb (150 ton)
Minimum height17.13 in.
Maximum height22.44 in.
Air supply145 psi
Air consumption42.4 cfm
Shipping weight732 lb

PRODUCT DIMENSIONS

Frame length61.02 in.
Width13.78 in.
Width with wheels18.31 in.
Handle length51.18 in.
Ground clearance1.57 in.



Product image of AC Hydraulic 150-1L on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $9,700.08
27.) 72200A - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 22 Ton


Product image of Norco 72200A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
28.) 72200B - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 22 Ton


Product image of Norco 72200B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
29.) 72200C - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 22 Ton


Product image of Norco 72200C on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
30.) 72200D - Item No.
Manufacturer: Norco

NORCO 72200D 22 TON CAPACITY AIR OPERATED HYDRAULIC AXLE JACK


PRODUCT DETAILS

The Norco 72200D is a 22-ton air-operated hydraulic axle jack with a long handle for reaching under low-overhang vehicles. Its compact design fits between tandem wheels, and it ships with three removable saddles and a holder.

FEATURES

  • Long handle for reaching under vehicles with low overhang.
  • Load release on the top-mounted handle works in any handle position.
  • Compact design fits between tandem wheels.
  • Self-retracting ram eliminates manual lowering.
  • Rust-inhibitive coating on the ram and extension screw.
  • Integrated filter protects the air motor; fast-lifting air motor.
  • Large-diameter wheels for easier maneuvering.
  • Safety bypass and overload systems prevent cylinder damage and keep the jack within the ASME/PASE load-limiting standard.

SPECS

Capacity22 tons
TypeAir-operated hydraulic axle jack
Stroke4.75 in.
Screw extension4.25 in.
Operating pressure range85-145 psi
Included adaptersThree removable 2 in. diameter saddles (3/4 in., 2-1/4 in. and 4 in. heights) with handle-mounted holder
Shipping weight115 lb

PRODUCT DIMENSIONS

Low height9 in.
High height22 in.
Overall length20 in.
Overall width13 in.
Handle length50 in.



Product image of Norco 72200D on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $930.00
31.) 72201B - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 22 Ton


Product image of Norco 72201B on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
32.) P302EX - Item No.
Manufacturer: Norco

P302EX Axle Jack


Product image of Norco P302EX on HCRCnow.com.
Price: $0.00 Request Quote
33.) P303NV - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Jack 60/40/20 ton


Product image of Norco P303NV on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $0.00 Request Quote
34.) P304NV - Item No.
Manufacturer: Norco

P403NV Air/Hydraulic Axle Jack 58/45/24/13 ton


Product image of Norco P304NV on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: N/A Request Quote
35.) P302 EXTRA - Item No.
Manufacturer: Norco

Air/Hydraulic Axle Kacl 85/25 Ton


Product image of Norco P302 EXTRA on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
Page 1 of 1 (Showing results 1 - 35 of 35)

« Back to Tools and Equipment Categories