Tools and Equipment - Jack Stands / Vehicle Ramps

or browse the results below.

Page 1 of 1 (Showing results 1 - 11 of 11)

1.) 81012 - Item No.
Manufacturer: Norco

12 Ton Capacity Jack Stands

INTENDED USE:

Fleet garages, agricultural and
construction maintenance shops.

FEATURES:

Unique spring loaded pawl provides constant locking pressure against lifting column.
Four legged base with foot pads for added strength and a more secure footing on asphalt.
Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

DIMENSIONS:

Low Height	19.625"
High Height	29.375"
Height Intervals	1.25"
Base Size	13" x 15"
Saddle Size	1.625" x 4.75"
Shipping Weight	86 lbs.

Product image of Norco 81012 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $355.00

2.) 81050 - Item No.
Manufacturer: Norco

50 Ton Capacity Trailer Stabilizing Stand

INTENDED USE:

To stabilize and assist in supporting
the front or rear end of a loaded or
unloaded tractorless trailer.

FEATURES:

Designed to meet the performance and safety requirements of the ASME PASE.
Meets OSHA requirements for stabilizing loaded and unloaded trailers.
100,000 lb. static load capacity.
15,000 lb. lifting capacity.
Adjusts from 39” to 51”.
Wide 14” diameter base for added stability.
8” diameter top plate.
Removable pipe handle.

DIMENSIONS:

Low Height	39"
Extended Height	51"
Base Size	14" Dia.
Saddle Size	8" Dia.
Shipping Weight	152 lbs.

Product image of Norco 81050 on HCRCnow.com.

Click - Download PDF of Drawing

Price: $766.00

Request Quote

3.) 81205 - Item No.
Manufacturer: Norco

5 Ton Capacity Jack Stands

INTENDED USE:

Low profile design in order to support
forklifts and heavy machinery.

FEATURES:

Pin type support column adjusts to four different height positions.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Handle provides ease of positioning and carrying.
9” square base secures and stabilizes load.
Each stand sold individually
5 Tons Each stand

DIMENSIONS:

Low Height	9.5"
High Height	15.75"
Height Intervals	3 x 2"
Base Size	9" x 9"
Saddle Size	3" x 4.5"
Shipping Weight	38 lbs.

Product image of Norco 81205 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $319.00

4.) 81208 - Item No.
Manufacturer: Norco

10 Ton Capacity Short Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.
10 Tons each stand
Each stand sold individually

DIMENSIONS:

Low Height	10.5"
High Height	17"
Height Intervals	4 x 1.5"
Base Size	12.5" x 12.5"
Saddle Size	3" x 5"
Shipping Weight	60 lbs.

Product image of Norco 81208 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $523.40

5.) 81209 - Item No.
Manufacturer: Norco

10 Ton Capacity Medium Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.
10 Tons each stand
Each stand sold separately

DIMENSIONS:

Low Height	18.5"
High Height	30"
Height Intervals	7 x 1.5"
Base Size	17" x 17"
Saddle Size	3" x 5"
Shipping Weight	80 lbs.

Product image of Norco 81209 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $660.43

6.) 81210 - Item No.
Manufacturer: Norco

10 Ton Capacity High Height Jack Stands

INTENDED USE:

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.

FEATURES:

Pin type support column adjusts to multiple height positions. See specification chart.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Four legged base made of heavy schedule 2” diameter pipe for added stability.
Large support saddle with locating lugs position and center load.

DIMENSIONS:

Low Height	28"
High Height	47"
Height Intervals	10 x 2"
Base Size	16" x 16"
Saddle Size	3" x 5"
Shipping Weight	106 lbs.

Product image of Norco 81210 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $820.43

Request Quote

7.) 81225 - Item No.
Manufacturer: Norco

25 Ton Capacity Jack Stands

INTENDED USE:

Fleet and maintenance garages where low profile stands are used to support trucks and loaded trailers.

FEATURES:

Pin type support column adjusts to four different height positions.
Pins chamfered for easier insertion into positioning holes.
Adjustment pin is secured to stand to prevent loss.
Handle provides ease of positioning and carrying.
3/8” thick solid steel base plate for added stability.
25 tons each stand

Product image of Norco 81225 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $573.29

8.) 82019 - Item No.
Manufacturer: Norco

20 Ton Capacity Pair of Truck Ramps (10 Ton Each Ramp)

INTENDED USE:

Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

Handles tires with up to 10” tread widths.
Telescopic 34" T-handle extends and lifts up to expose wheels for easy
maneuverability around the shop. Retracts for easy storage.
Perforated holes in ramps provide traction for the tires.
Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

DIMENSIONS:

Length	48.25"
Width	12.625"
Height	9"
Shipping Weight	204 lbs.

Product image of Norco 82019 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,641.86

Request Quote

9.) 82020 - Item No.
Manufacturer: Norco

20 Ton Capacity Pair of Wide Truck Ramps (10 Ton Each Ramp)

INTENDED USE:

Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

Handles tires with up to 16” tread widths.
Telescopic 34" T-handle extends and lifts up to expose wheels for easy
maneuverability around the shop. Retracts for easy storage.
Perforated holes in ramps provide traction for the tires.
Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

DIMENSIONS:

Length	50.5"
Width	18.375"
Height	9.25"
Shipping Weight	346 lbs.

Product image of Norco 82020 on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $1,198.00

Request Quote

10.) 81022B - Item No.
Manufacturer: Norco

Trailer Stabilizer Stand USA 20 Ton

Product image of Norco 81022B on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $357.75

11.) 81022Bi - Item No.
Manufacturer: Norco

Trailer Stabilizer Stand Imported 20 Ton

Product image of Norco 81022Bi on HCRCnow.com.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

Price: $442.80

Page 1 of 1 (Showing results 1 - 11 of 11)

« Back to Tools and Equipment Categories