Tools and Equipment - Dolly / Handler

or browse the results below.

Page 1 of 1 (Showing results 1 - 13 of 13)
1.) 72045 - Item No.
Manufacturer: Norco

Disc Brake Hub Handler


INTENDED USE:

Designed for removing, installing, and transporting heavy disc brake hub assemblies.

FEATURES:
  • Replace rotor, seals and bearings with no heavy lifting.
  • Reduces lost-time injuries by preventing back and hand injuries.
  • Four polyurethane caster wheels to protect epoxy floors while enhancing smooth maneuverability through the shop (two caster wheels with locks).
  • Works on disc brake hubs for all Class 8 trucks, transit vehicles and school buses.
  • Attachment to the hub is made easy by using the vehicle lug nuts.
  • Quickly raises the load to working height using either air or battery tools.
  • 14-1/4" range of operation.



Product image of Norco 72045 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing 		Price: $1,189.99 Request Quote
2.) 82310 - Item No.
Manufacturer: Norco

Single Tire Handler Dolly - Narrow


Narrow Model
INTENDED USE:

To provide added leverage to easily remove or install truck tire-and-wheel assemblies.

FEATURES:
  • Heavy-duty tubular steel construction capable of handling 300 pounds.
  • Easy grip handle along with improved “bent arm” design improves leverage for easier installation and minimizes back strain.
  • Steel alignment rollers allow simple alignment of the wheel to the wheel studs.
  • Spring-loaded kickstand offers convenient storage.
  • Can accommodate tire diameters from 24" to 36".
DIMENSIONS:
Handles Tires 24" - 36"
Length 42.5"
Width 24.75"
Shipping Weight 19 lbs.
   

 




Product image of Norco 82310 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $134.00
3.) 82312 - Item No.
Manufacturer: Norco

26" Single Tire Handler Dolly - Wide Model


INTENDED USE:

To provide added leverage to easily remove or install truck tire-and-wheel assemblies.

FEATURES:
  • Heavy-duty tubular steel construction capable of handling 300 pounds.
  • Easy grip handle along with improved “bent arm” design improves leverage for easier installation and minimizes back strain.
  • Steel alignment rollers allow simple alignment of the wheel to the wheel studs.
  • Spring-loaded kickstand offers convenient storage.
  • Can accommodate tire diameters from 36" to 48".
DIMENSIONS:
Handles Tires 36" - 48"
Length 41"
Width 32"
Shipping Weight 22 lbs.
   

 




Product image of Norco 82312 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $154.00
4.) 82320 - Item No.
Manufacturer: Norco

3/4 Ton Capacity Wheel Dolly


INTENDED USE:

For the removal and installation of single, tandem and duplex tires and wheels.

FEATURES:
  • Dolly handles any tire diameter and up to 1500 lbs. combined tire and wheel weight.
  • Three 4” diameter swivel ball bearing caster wheels provide easy maneuverability and positioning.
  • Travel adjustment on rear locking caster wheel matches lifting arms with spindle angle.
  • 6’ chain included to secure wheel assembly to dolly during removal and transport.
  • Quick disconnect push/pull handle provides unobstructed access to hub area.
DIMENSIONS:
Lift Travel 4.75"
Lift Arms  
  Spread 26"
  Length 24.5"
Overall Dimensions  
  Length 43.5"
  Width 39.5"
  Height 35"
Shipping Weight 175 lbs.
   

 




Product image of Norco 82320 on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,072.82
5.) 72040B - Item No.
Manufacturer: Norco

Brake Drum Handler


Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
6.) 72040C - Item No.
Manufacturer: Norco

NORCO 72040C BRAKE DRUM HANDLER


PRODUCT DETAILS

Brake drum handler designed for removing, installing, and transporting outboard-mounted brake drums and inboard-mounted drums with disc wheel hubs.

FEATURES

  • Handles 15-inch and 16-1/2-inch drums.
  • Rotating handle assists with raising and lowering the drum.
  • 8-inch ball-bearing wheels with semi-pneumatic tires support maneuverability.
  • Adjustable angle bracket secures supported drum configurations to the carriage.
  • Detachable handle supports convenient storage.

SPECS

Low lift height10.25 in.
High lift height15.25 in.
Handle length35.5 in.
Shipping weight64 lb

PRODUCT DIMENSIONS

Length62.5 in.
Width21 in.



Product image of Norco 72040C on HCRCnow.com.
Price: $407.99
7.) 78090A - Item No.
Manufacturer: Norco

Car Dolly 3600 Lb. Capacity


INTENDED USE:

For easy movement of vehicles that have been rendered inoperable due to engine/ transaxle removal or other mechanical problems. Frees up lifts and floor jacks for other work to be performed. Used in automobile repair, collision repair, and vehicle inspection applications.

FEATURES:
  • Supports a vehicle with or without tires.
  • Allows FWD vehicle to be easily moved in the service bay when drive train has been removed.
  • Universal design fits any car without the need for additional vehicle adapters.
  • Quick and independent width and height adjustments. Fully adjustable outriggers to fit any vehicle frame width. Threaded lift saddles with rubber pads are independently adjustable and provide maximum frame protection.
  • Does not require installation to the subframe or engine/transaxle cradle mounting holes.
  • Can be used in pairs for maximum maneuverability in tight places.
  • Four 6” diameter ball bearing mounted swivel caster wheels rated at 900 pounds capacity each.
  • Two of the four 6” wheels have wheel locks to prevent dolly from moving.
DIMENSIONS:
Height Adjustment 12.75" to 15.75"
Width 17"
Length Adjustment 30" to 60"
Shipping Weight 65 lbs.
   

 




Product image of Norco 78090A on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,046.33
8.) 82300C - Item No.
Manufacturer: Norco

Wheel Dolly 1-1/2 Ton


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
9.) 82300D - Item No.
Manufacturer: Norco

Wheel Dolly Rigid Front Wheels 1 Ton


Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
10.) 82301B - Item No.
Manufacturer: Norco

1 Ton Wheel Dolly


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
11.) 82301C - Item No.
Manufacturer: Norco

Wheel Dolly 1-1/2 Ton


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
12.) 82301D - Item No.
Manufacturer: Norco

NORCO 82301D 1 TON CAPACITY WHEEL DOLLY, SWIVEL FRONT WHEELS


PRODUCT DETAILS

One-ton wheel dolly with swivel front wheels, designed for removing and installing single, tandem, and duplex tires and wheels.

FEATURES

  • Swivel casters at the front and rear provide side-to-side maneuverability.
  • 4-inch wheels with polyurethane tread protect the floor.
  • Lift arms adjust inward for common dual wheel combinations and outward for larger combinations.
  • Lift arms with ball bearing rollers rotate the rim for bolt pattern alignment.
  • Lift arms supported at both ends minimize wheel movement.
  • Adjustable-height push bar provides unobstructed access to the hub area.
  • Rear caster has 3-1/4 inches of travel adjustment to match the lift arms to the spindle angle.
  • Safety chain secures the wheel assembly during removal and transport.

SPECS

Capacity1 ton
Lift travel7.5 in.
Shipping weight209 lb

PRODUCT DIMENSIONS

Length50.5 in.
Width44.5 in.
Height39 in.



Product image of Norco 82301D on HCRCnow.com.

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $1,621.06
13.) 82302A - Item No.
Manufacturer: Norco

High Lift Wheel Dolly 1/2 Ton


Download PDF
Click - Download PDF of Drawing 		Price: Discontinued This product has been discontinued.
Page 1 of 1 (Showing results 1 - 13 of 13)

« Back to Tools and Equipment Categories