Parts - Handles

or browse the results below.

Page 1 of 1 (Showing results 1 - 9 of 9)
1.) F-2533-5 - Item No.
HANDLE


  • Total Length - 18-3/8in
  • Small End Diameter - 0.856in 
  • Small End Inside - 0.650 X 0.409in
  • NOTE: All measurements are approximate



Product image of F-2533-5 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $31.40
2.) F-2332JSC-5 - Item No.
HANDLE ASSEMBLY (RED OR BLACK) - NON RETURNABLE


  • Diameter - 13/16in (21mm)
  • Length - 16-5/8in (422mm)
  • NOTE: All measurements are approximate



Product image of F-2332JSC-5 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $18.98
3.) G73500-0026 - Item No.
HANDLE ASSEMBLY - NON RETURNABLE


** DISCONTINUED 09-27-2023 **

  • Diameter - 1-1/4in (32mm)
  • Square - 9/16in (15mm) per side 
  • NOTE: All measurements are approximate

REFFERENCE ONLY: For Blackhawk Model no. B6350 - This handle is for serial numbers before QYG191002700

REFFERENCE ONLY: For Blackhawk Model no. B6350 - For serial numbers after QYG191002700, use handle QG73601-K14




Product image of G73500-0026 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: Discontinued This product has been discontinued.
4.) 26033-12 - Item No.
HANDLE ASSEMBLY - NON RETURNABLE


  • Diameter - 1-3/8in (35mm)
  • Square - 15/32in (12mm) per side
  • NOTE: All measurements are approximate



Product image of 26033-12 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $69.06
5.) B630-5 - Item No.
HANDLE (2 PIECE) - NON RETURNABLE


  • Diameter - 1-11/32in (34mm)
  • Square - 11/16in (17mm) per side
  • NOTE: All measurements are approximate



Product image of B630-5 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $26.12
6.) 234957 - Item No.
2 TON HANDLE (1 PIECE) (DIAMETER 1-11/32 +-) FOR HYDRAULIC FLOOR JACK - NON RETURNABLE


  • For Walker, Lincoln, Hein Werner, Snap-On, Napa, Ajax and Gray
  • Fits Model no. 93630, 93632, 93642, 93652, HW93642, HW93652, FSJ-40B and FSJ-60B (All Series)



Product image of 234957 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $69.36
7.) 928054 - Item No.
2 TON HANDLE (2 PIECE) (DIAMETER 1-11/32 +-) FOR HYDRAULIC FLOOR JACK - NON RETURNABLE


  • For Walker, Lincoln, Hein Werner, Snap-On, Napa and Ajax
  • Fits Model no. 93642 and HW93642 (All Series)



Product image of 928054 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $57.64
8.) 234961 - Item No.
3 TON HANDLE (1 PIECE) (DIAMETER 1-11/32 +-) FOR HYDRAULIC FLOOR JACK - NON RETURNABLE


  • For Walker, Lincoln, Hein Werner, Snap-On, Napa and Ajax
  • Fits Model no. 93652, HW93652 and YA700 (All Series)
  • Diameter - 1-11/32in (34mm)
  • Hex Hole - 0.521 (Flat to Flat)
  • NOTE: All measurements are approximate



Product image of 234961 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $75.92
9.) 928055 - Item No.
3 TON HANDLE (2 PIECE) (DIAMETER 1-11/32 +-) FOR HYDRAULIC FLOOR JACK - NON RETURNABLE


  • For Walker, Lincoln, Hein Werner, Snap-On, Napa and Ajax
  • Fits Model no. 93652 and HW93652 (All Series)



Product image of 928055 on HCRCnow.com.

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

 Price: $83.38
Page 1 of 1 (Showing results 1 - 9 of 9)

« Back to Parts Categories