Parts - Overseas Floor Jacks

• (Old Part No. G62000-0018)
• Total Length 5-3/8 Length from bottom of U-Joint to end 2-1/8 Inch
• Square End Size - 14mm x 14mm (0.550 Inches)
• Fits Floor Jacks Listed Below
• Sears Craftsman - 50156 50239 50240 50244 50357 Omega - 26020 Michelin - G-735 Pro-Lift - G-737 Blackhawk B6350
• NOTE: Sears 50156 there are two versions. This part only fits the newer version. The total lenght of this part is 5-3/8 inches. If your part is 6-1/4 this WILL NOT FIT. (Rod from U-Joint to the end must be 2-1/8 Inch)
• Verify Fitment (Click Here)

Tariff: Prices are subject to change due to the tariff surcharge. Shipping: This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Total Length - 3-1/2 Inch
• Main Rod Length - 2-1/8 Inch
• Rod Diameter - 0.605 thousandths
• Square Head (Part that Meets Handle) - 0.516 thousandths
• NOTE: For More Products Related to this Jack See Below.

Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

• Click Here to See Additional Picture

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

U-Cup Diameter - 28mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

• Threads - 20mm - 1.5
• Length - 27mm
• Step - 15.5mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Diameter of Hole - 1-1/8 
• Wire - 0.137 
• NOTE: HOW TO MEASURE A TORSION SPRING
• NOTE: HOW-TO: DECIDE Right or Left Torsion Spring
• NOTE: (Price is for 1 Piece)
• NOTE: All measurements are approximate

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Threads - 20mm - 1.5
• Length - 60mm
• Step 1 - 15.5mm
• Step 2 - 14.5mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Threads - 20mm - 1.5
• Length - 30mm
• Step - 15.5mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Threads - 20mm - 1.5
• Length - 60mm
• Step 1 - 15.5mm
• Step 2 - 14.5mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• Click Here to Purchase the Air Motor Repair Kit

Tariff: Prices are subject to change due to the tariff surcharge. Shipping: This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

• NOTE: This is a Special Order Item - This Item is NON-RETURNABLE.
• Cylinder Threads - 24mm
• Cylinder Bore - 16mm
• Ram Diameter - 14.5mm

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

• NOTE: This is a Special Order Item - This Item is NON-RETURNABLE.
• Cylinder Threads - 27mm
• Cylinder Bore - 20mm
• Ram Diameter - 14.5mm

• The Flat gear is about 45 to 46 mm in diameter (1.70 inch).
• The Cupped gear is about 42 to 43 mm in diameter (1.65 inch).
• Hole size across flats 10mm (0.39 inch) end to end 12/13mm (1/2 inch)

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

• Total Length - 0.675 x 6-1/4 inches

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.