COVID-19: Update from HCRC

Parts - Big Red

Cart View Cart

or browse the results below.

Page 1 of 1 (Showing results 1 - 34 of 34)

 

Item Description Price Add to Cart
1.) 46216 - Item No.
8-Ton Long Ram (Non-Returnable)

$109.50 Add to Cart
2.) QF4.0 (PUMP) - Item No.
Complete Hydraulic Pump Unit (Non-Returnable)


Click to view image
$79.50 Add to Cart
3.) QLZ2C-4 - Item No.
Torsion Spring

$14.50 Add to Cart
4.) QLZ2C.2.4 - Item No.
HANDLE COVER (For T830018) (Non-Returnable)


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$11.03 Add to Cart
5.) QLZ2C.2C - Item No.
COMPLETE HANDLE ASSEMBLY FOR T830018


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$43.80 Add to Cart
Other products that may interest you:
6.) QLZ2C.3-3A - Item No.
FLAT GEAR SOLD AS A 2 PC SET

  • The Flat gear is about 45 to 46 mm in diameter (1.70 inch).
  • The Cupped gear is about 42 to 43 mm in diameter (1.65 inch).
  • Hole size across flats 10mm (0.39 inch) end to end 12/13mm (1/2 inch)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$21.98 Add to Cart
7.) QLZ2C.6-3A - Item No.
CUPPED GEAR SOLD AS A 2 PC SET

  • The Flat gear is about 45 to 46 mm in diameter (1.70 inch).
  • The Cupped gear is about 42 to 43 mm in diameter (1.65 inch).
  • Hole size across flats 10mm (0.39 inch) end to end 12/13mm (1/2 inch)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$21.98 Add to Cart
8.) QYL8-25A - Item No.
Release Valve for TA92006

  • Special Order Item

Click to view image
$23.75 Add to Cart
9.) T815012L-16 - Item No.
Rubber Saddle Pad 3.25 Inch

  • Diameter - 3-1/4 Inch

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$15.52 Add to Cart
10.) T820013D-2 - Item No.
FRONT WHEEL ASSEMBLY (Non-Returnable)

  • All Steel Wheel Set
  • Center Hole Diameter - 3/4 With Bushing 7/16
  • Wheel Diameter - 2-9/16
  • Wheel Width - 5/8
  • Hub Width - 1/2
  • Axel 6 Inches Long
  • NOTE: HOW TO MEASURE A WHEEL

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$11.50 Add to Cart
11.) T82002-27 - Item No.
RETURN SPRING (For T82002) (Non-Returnable)


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$6.50 Add to Cart
12.) T820033-6 - Item No.
CARRY HANDLE (NON-RETURNABLE)


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$6.50 Add to Cart
13.) T820033.2 - Item No.
POWER UNIT ASSEMBLY (NON-RETURNABLE)


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$24.50 Add to Cart
14.) T825010.4 - Item No.
Saddle for T825010C (Non-Returnable)

  • Special Order Item
  • Diameter Outside - 2-5/16 Inch
  • Diameter Inside - 1-7/8 Inch
  • Stem Diameter - 15/16 Inch
  • Fork at bottom of Saddle - 9/16 Inch gap between prongs
  • All Measurements Approximate

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$24.50 Add to Cart
15.) T830018.3 - Item No.
Saddle for T830018T (Non-Returnable)

  • Special Order Item
  • Diameter Outside - 5-1/16 Inch
  • Dameter Inside - 4-1/4 Inch (no pad will fit)
  • Stem Diameter - 1-3/8 Inch
  • Fork at bottom of Saddle - 3/4 Inch gap between prongs
  • All Measurements Approximate

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$29.50 Add to Cart
16.) T830023.4.1 - Item No.
U-Joint (For Craftsman 50102) (Non-Returnable)

  • Threads - 10mm-1.0
  • Square - 13x13mm
  • Total Length - 143mm (5-5/8 Inch)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

$38.50 Add to Cart
17.) T83006.1 - Item No.
Saddle (For T83006 S.U.V. Jack) (Non-Returnable)


Click to view image
$23.50 Add to Cart
18.) T83503.4.1 - Item No.
Universal Joint (For T83014) (Non-Returnable)

  • Threads - 10mm-1.0
  • Square - 13x13mm
  • Total Length - 120mm (4-3/4 Inch)

NOTE: (Torin T83014) For Jacks Manufactured in 2013 and Newer. If Your Jack was Manufactured BEFORE 2013, This Kit May Not Fit.


Click to view image
$39.50 Add to Cart
19.) T83508.3.1 - Item No.
Universal Joint (Non-Returnable)

  • Thread - 10mm-1.0
  • Square - 13x13mm
  • Length - 135mm (5-3/8 inch)

Click to view image

Download PDF
Click - Download PDF of Drawing		$39.50 Add to Cart
20.) T83508.5-4 - Item No.
HANDLE LOCK PIN FOR T830018


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$11.03 Add to Cart
21.) T84008-4 - Item No.
Saddle (For 50168) (Non-Returnable)

  • NOTE: Special Order Item

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$39.50 Add to Cart
22.) TA92006-20 - Item No.
Complete Air Motor (Non-Returnable)


Click to view image
$99.50 Add to Cart
23.) TE05001.3 - Item No.
Pump Assembly (for TR4076) (Non-Returnable)


Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

$79.50 Add to Cart
24.) TQ22001.1.2 - Item No.
Release Valve Rod (For TQ35001) (Non-Returnable)

  • Special Order - Delivery Time. 2 to 4 weeks Approx.

Click to view image
$39.50 Add to Cart
25.) TXJ1001-002 - Item No.
Handle Socket (Non-Returnable)

  • This is not stocked in the USA. Special Order 10 to 14 Weeks.
  • NOTE: This part is not exchangable or returnable.

Click to view image
$58.76 Add to Cart
26.) TXJ1001-021 - Item No.
Complete Hydraulic Unit Assembly (Non-Returnable)


Click to view image
$139.50 Add to Cart
27.) TY20002.1.2 - Item No.
Complete Air Motor (Non-Returnable)


Click to view image
$99.50 Add to Cart
28.) T82000Y.3-1 - Item No.
SADDLE ASSEMBLY (NON-RETURNABLE)

  • Diameter - 44mm (1-3/4 Inch)
  • Stem Diameter - 14mm (9/16 Inch)
  • All measurements approximate

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$13.50 Add to Cart
29.) T820033.1 - Item No.
HANDLE ASSEMBLY (NON-RETURNABLE)

  • Diameter: 22mm (0.850 Inch)
  • Length: 17 Inch
  • Pinched End
  • All measurements approximate

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

Discontinued This product has been discontinued.
30.) QLZ2C.3-2C - Item No.
SHAFT (For Spur Gear) (Non-Returnable)

  • Total Length - 3-1/2 Inch
  • Main Rod Length - 2-1/8 Inch
  • Rod Diameter - 0.605 thousandths
  • Square Head (Part that Meets Handle) - 0.516 thousandths
  • NOTE: For More Products Related to this Jack See Below.

Click to view image

Download PDF
Click - Download PDF of Drawing

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$29.50 Add to Cart
Other products that may interest you:
31.) T820033B.1 - Item No.
Casters (2 Piece Set) (For T825010C) (NON-RETURNABLE)

  • Rated Up to 3 Ton Per Pair on a Floor Jack
  • Caster Size - 2 Inch (50mm)
  • Wheel - 1-1/2 x 5/8 Inch (39mm x 16mm)
  • Stem - 5/16 x 11/16 Inch (7mm by 18mm)
  • All measurements approximate
  • NOTE: How to measure a caster (Click here)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

Discontinued This product has been discontinued.
32.) QLQD2A.2-7B - Item No.
U-BRACKET (For Plunger) (Non-Returnable)

  • Special Order Item
  • NOTE: (Price is for 1 Piece)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment. Shipping to any destination outside of the Continental U.S. may have additional shipping charges.

$13.95 Add to Cart
33.) T815012L.3.1A - Item No.
Universal Joint (For T815012L) (Non-Returnable)

  • Threads - 10mm-1.0
  • Square - 10x10mm
  • Total Length - 122mm (4-7/8 Inch)

Click to view image

This is our estimated shipping charge. If the actual charge is higher we will contact you before shipment.

$38.50 Add to Cart
34.) 1511B-SVS - Item No.
SPECIAL STYLE SEAL (For AIR MOTOR) (Non-Returnable)

  • Diameter - 18mm
  • Hole in Center - 7mm
  • Larger Opening in Center - 14mm
  • Height - 11mm
  • NOTE: This part is NON-RETURNABLE

Click to view image
$20.70 Add to Cart
Page 1 of 1 (Showing results 1 - 34 of 34)

 

« Back to Parts Manufacturers